Papers by Keyword: Pilot Unit

Abstract: Research was сarried out on a pilot plant on sintering of various size siderite ore and limonite taken in various ratios. To study impact of a number of process factors on the sintering process performance and the obtained agglomerate quality at the minimum number of the carried out experiments, one of the experiment planning methods was used, and regression equations were derived. With these equations the effect of the ore size, siderite ore and limonite ratio, solid fuel consumption, sintered layer height on the agglomeration unit performance and the agglomerate metallurgical properties was reviewed. The obtained work results have great practical importance, as they allow optimization of siderite ore sintering operation conditions and production of high quality agglomerate. They may be used at a variety of the country agglomeration factories, where siderite ores will be used as iron ore component of the sinter burden.

Abstract: Laser pyrolysis is a very suitable gas-phase process for the synthesis of a wide range of nanoparticles at laboratory scale. The principle of the method is based on the decomposition of gaseous or liquid reactants by a high power CO2 laser followed by a quenching effect. The literature reports the possibility to produce carbides, nitrides, oxides, metals and composites nanoparticles by this process. This paper reports a study of the effect of the laser intensity (using an innovative optical system) and of the gas flow rates on the characteristics (size and structure) of silicon carbide (SiC) nanoparticles produced at pilot scale (up to 1.13 kg/h) by using a mixture of silane (SiH4) and acetylene (C2H2). It has been shown that the decrease of the gas flow rate favors the increase of the mean grain size of the particles and that the increase of the laser intensity seems to provoke an increase of the mean crystal size and/or crystal number.