Papers by Keyword: Point Grinding

Abstract: It studies the influence of linear speed of grinding wheel and rotational speed of workpiece to complex rotator surface roughness. Using self-designed NC quick-point grinding machine do the grinding test at different linear speeds of grinding wheel and different rotational speeds of workpiece, gained the relationship curve between the linear speed of grinding wheel, rotational speed of workpiece and complex rotator surface roughness. The test results show that using quick-point grinding technology can grind multiple external cylindrical and cone-shaped surfaces by only one time fixing, it can get 0.025um surface roughness in a reasonable condition of the grinding parameters. During point grinding process, higher wheel speed gets better surface roughness, higher workpiece shaft speed gets worse surface roughness.

Abstract: In point grinding process, the contact area of point grinding is much smaller than that of conventional cylindrical grinding under same conditions, so the grinding power and heat to measure is lower and the cooling condition is improved obviously. For green manufacturing, the point grinding process has the significance to reduce the consumption of grinding fluid and improve ground surface integrity and greenness. This study analyzes the geometric configuration of the contact area between wheel and workpiece in point grinding process, establishes the geometric and mathematic models of the contact area, and investigates the relations between the grinding parameters and the grinding power by the simulations. The MQL and semi-dry point grinding experiments are performed on the ground surface integrity. These investigations show that the MQL and semi-dry grinding can be achieved in point grinding process under less contact area and higher jet pressure condition for the high greenness demand.

Abstract: Point grinding is a new type of high and super-high speed grinding process with a point contact zone and less grinding force. Because of the lower grinding power, the grinding heat in point grinding process is much less than that of the conventional grinding process. Therefore, the less grinding coolant jet parameters can be used during point grinding process. That is very propitious to the environment and resource, as well as the green manufacturing. Based on the mathematic model of the edge contact area of point grinding, the simulations of the edge contact area with point grinding angles and depth of cut was performed to study the grinding power. In addition, the relations between the grinding power and the depth of cut and vertical grinding angle were investigated. The dynamic pressure and velocity distributions in the airflow layer around the wheel edge were analyzed more by means of experiment. The point grinding experiment for grinding coolant jet parameters was performed.

Abstract: During cylindrical grinding process, the geometric configuration and size of the edge contact area between the grinding wheel and workpiece have the heavy effects on the workpiece surface integrity. In consideration of the differences between the point grinding and the conventional high speed cylindrical grinding, the geometric and mathematic models of the edge contact area in point grinding were established. Based on the models, the numerical simulation for the edge contact area was performed. By means of the point grinding experiment, the effect mechanism of the edge contact area on the ground surface integrity was investigated. These will offer the applied theoretic foundations for optimizing the point grinding angles, depth of cut, wheel and workpiece speed, geometrical configuration and size of CBN wheel and some other grinding parameters in point grinding process.