Papers by Keyword: Press Working

Abstract: Based on the rolling of explosive welded composite sheet the paper described the feature of press working of the explosive welded composite material metals as well as their technologies, structures, properties and applications ,pointing out that combination of explosive welding with the traditional press working process is a new route of significant importance to manufacturing composite material metals with different varieties, shapes, dimensions, properties and applications and thus can achieve greater economical, technical and social benefits.

Abstract: During the consecutive piercing process of metal sheets, it is very difficult to prevent the scrap-jumping completely. The scrap-jumping causes defects generation. Defective goods will be produced when processing is continued without noticing the scrap-jumping. To solve this problem,we made a die that was able to detect scrap-jumping with the load sensor and transmission-type fiber line-laser sensors for pierce processing and executed the defect detection experiment. As a result of the experiment, the newly developed load sensor was able to detect the defect in the following stamp of the scrap-jumping. On the other hand, the fiber line-laser sensor was able to detect the scrap-jumping directly before the following stamp.

Abstract: The bolts and nuts are widely used in various fields as important joining elements with long history. However, loosening induced by the vibration and external loads is still a big problem. And the loosening sometimes causes very serious accident without notice. This paper deals with a special stud bolt named “Super Stud Bolt (SSB)” which can prevent loosening effectively. There is a thin walled tube between the upper and lower threads, which can be deformed along the axial direction so that the phase difference is produced and SSB is developed. This phase difference induces the contrary force on the surfaces of the upper and lower threads, which brings out the anti-loosening performance. In this study, the processing and fastening-loosening courses are simulated with the finite element method. And the anti-loosening performance is analyzed and realized. In addition, the anti-loosening performances under various phase differences are compared and finally best dimensions for SSB are examined.