Papers by Keyword: Quarter Car Model

Abstract: In this paper, a construction of a prototype to represent passive vehicle suspension system for quarter car model is considered. The prototype is represented by two degree-of freedom quarter-car model which are conventionally used by researchers. This laboratory equipment is developed in order to familiarize students with 2 DoF passive suspension system model. It consists of two masses, two springs and a damper. This equipment is easily dismantled and could be assembled with different spring and damper constants which contribute to different characteristics of the suspension system. A number of experiments have been carried out using the experiment setup in order to identify the suspension system characteristics i.e. experiments with different vehicle body mass, different period for one pulse and different pulse width of input pressure of the road excitation have been conducted. The experiment results are evaluated based on the vehicle body displacement and tire displacement of the prototype. Experiment results show that the pulse width of the input pressure or road profile is directly affected the characteristic of this passive suspension system. Lastly, simulations were done in order to compare the simulation and experimental results.

Abstract: The introduction of anti-lock braking system (ABS) has been regarded as one of the solutions for braking performance issues due to its notable advantages. The subject had been extensively being studied by researchers until today, to improve the performance of the todays vehicles particularly on the brake system. In this paper, a basic modeling of an ABS braking system via slip control has been introduced on a quarter car model with a conventional hydraulic braking mode. Results of three fundamental controller designs used to evaluate the braking performance of the modeled ABS systems are also been presented. This revisited modeling guide, could be a starting point for new researchers to comprehend the basic braking system behavior before going into more complex braking systems studies.

Abstract: The paper discusses the response and the accuracy of a quarter car model with a non-linear damping force. The non-linear shock absorber model was a result of an experiment that was conducted earlier and the mathematical model was verified. Based on this model simulation responses of the sprung and unsprung masses between a linear and the non-linear damper were compared. The wheel of the quarter car model was excited by a road profile and according to the results the non-linear quarter model showed responses which were not depicted and captured by the linear model.