Papers by Keyword: Reversible Machining

Abstract: A reversible machining method using micro electrical discharge machining (EDM) was developed. This new method can achieve depositing or selective removing of metal material for the fabrication of micro structures. It is easy to transform the machining process from deposition to removal in one EDM machining system. In micro EDM deposition process, brass, tungsten and steel material can be deposited successfully. The deposited material has compact fine texture and combines close to workpiece. Then, micro complex structures by series deposition strategy and sub-deposition strategy were deposited. In the selective removal process, the machining effects of different working mediums were researched. Results show that the machining effect in liquid medium is better than that of in air. Finally, using the micro reversible EDM process, a micro square column with 0.070mm in side length, 0.750mm in height and a micro cylinder with 0.140mm in diameter, 1.180mm in height were fabricated.

Abstract: Based on the principle of micro electrical discharge machining (EDM), a reversible machining method is proposed, which can achieve depositing or removing selectively metal material for the fabrication of micro structures. It is easy to transform the machining process from deposition to removal in one machining system. The characteristics of the deposited material show that the components of deposited material are almost the same as those of the tool electrode, and the metallurgical bonding has formed on the interface between the deposited material and the base. Moreover, the deposited material has well machinability in different micro EDM selective removal process, including micro EDM die-sinking and micro EDM milling. As a result, a micro square column with 0.1mm in side length, 0.88mm in height and a micro cylinder with 0.14mm in diameter, 1.18mm in height were fabricated by using the micro reversible EDM process.

Abstract: A new micro EDM method is described. First, the basic principles of micro EDD are analyzed and realized conditions are predicted. Then with an ordinary EDM shaping machine and electrode brass, steel and tungsten, a large number of experiments are carried out in air to obtain the effects of different processing parameters on micro EDD. A micro cylinder with 0.19mm in diameter and 7.35mm in height is formed on high-speed steel surface. By exchanging the polarities of electrode and workpiece the deposited material can be removed selectively, thus the reversible machining is realized. In the end, measurements show that the deposited material is compact and hardened, whose components depend on the tool electrode material although Zn in brass electrode is oxidized to ZnO.