Papers by Keyword: Shear Wall Component

Abstract: Reinforced concrete (RC) shear wall component is a very important lateral force-resisting member which is widely used in China. Its seismic behavior has a great impact on the seismic performance of the overall structure. Damage of some RC shear wall structures under the earthquake is caused by the damage of shear wall components, So shear wall components are an essential seismic members. However, the test datum are not enough to study the performance of RC shear wall components, Therefore, Finite element simulation of RC shear wall components is performed by software ABAQUS in the paper. Through comparing with the finite element simulation and the test of load - displacement skeleton curve, failure mode and steel bar strain, the result shows that the finite element simulation can more accurately simulate the situation of the test, verifying the finite element simulation is the most important research tool besides test.

Abstract: In order to determine the deformation performance index limits for medium-height RC shear wall components based on Chinese codes with the shear span ratio between 1.0 and 2.0, the reliability of the nonlinear finite element method was first verified by four typical medium-height shear wall components experiments in some literatures. Then, the nonlinear finite element method was applied to analyze a set of medium-height RC shear wall components designed according to current Chinese codes. Parametric studies were made of the influence of shear span ratio λ, axial compression ratio μ and main flexural reinforcement ratio of confined boundary members ρflex. Finally, the deformation performance index and its limits of the medium-height RC shear wall components under severe earthquakes are presented by the finite element model results.