Papers by Keyword: Specularite

Abstract: Laboratory research on the mineral processing technique of a specularite ore from Baxi was performed, while the processes including gravity separation, low intensity magnetic separation(LIMS) -high intensity magnetic separation(HIMS)-gravity separation was adopted. The run-of-mine ore was milled till the -0.074 mm range accounts for 50% and treated through a LIMS – HIMS process, with the magnetic field strength of LIMS being 95.52 kA/m and HIMS,1.2T. As a result, an iron concentrate grading about 67.58% at a recovery of 96.21% can be obtained, which are rather good metallurgical performances. The iron concentrate with high grade also could be beneficiated by table separation, but its recovery is lower than it obtained from intensive LIMS – HIMS dressing.

Abstract: Along with the continuously rose of the iron ore price and the Chinese iron ore quantity demanded, Iron ore self-sufficient rate has become the bottleneck of Chinese steel industry development. In order to increase Chinese ore self-sufficiency rate, the paper study the xinjiang region low grade specularite. When the crude ore grade is 35%, the mass percent of reducing agent pulverized coal is 12%, roasting temperature is 800°C，roasting time is 50 min, milling fineness is 90% passing 0.074 mm and the magnetic induction is 84kA/m, after a low intensity magnetic separation, the iron concentrate can be got whose yield is 42.83%, grade is 62.04% and recovery is 79.26%.

Abstract: An iron ore contains specularite and hematite which are its main iron minerals and carbonates such as calcite which are its main gangue minerals. The ore is very apt to produce slime in the grinding process，leading to a deteriorated beneficiability. The rough iron concentrate can be obtained by using high gradient magnetic separator to discard tailings with the grinding fineness of 95% -0.074mm. Then the rough concentrate is treated by reverse flotation to produce a final concentrate with the operation recovery of 66.49% and the iron grade of 66.12%,and the total recovery of iron could reach58.70%.

Abstract: An iron ore contains specularite and hematite which are its main iron minerals. And its main gangue minerals are specularite, part of the clay material and a small amount of quartz.Tests are made on the ore by adopting processes including gravity separation, high intensity magnetic separation, high intensity magnetic-gravity separation and high intensity magnetic - reverse flotation. The test results show that the separation process of high intensity magnetic-reverse flotation can obtain an iron concentrate grading about 66.62% at a recovery of 58.38％ from an iron ore assaying around 35.00% iron, rather good metallurgical performances.