Papers by Keyword: Structure Analysis

Abstract: Reinforced Concrete Hollow floor system was named by its typical inner core and worked as an excellent horizontal bearing structure. It has fine mechanical ability and good thermal isolation character. The author compared reinforced concrete hollow floors and traditional reinforced concrete floor. And studied their development in long span or large loaded building.

Abstract: The car overpass can play a significant role in easing traffic pressure. So for maximum easing traffic pressure, two types of car overpass are put forward: steel trussed girder-bridge and steel trussed cable-stayed bridge. Then establish a three-dimensional finite element model of the steel truss bridge and cable-stayed bridge by ANSYS. According to stress analysis and comparison of the steel truss and steel truss cable-stayed, the cable-stayed structure can enhance structural rigidity and strength, and have little influence on traffic.

Abstract: When the frame shield support was applied in the fully mechanized driving process of the seam gateway, there would be some incongruous problems. Aimed at the problems, mainly was discordance between the fully mechanized driving and the gateway support, we put forward the requirements of the multi-function platform and made the design scheme clear. By applying the finite element software, the simulation of the dynamics response was conducted on the multi-function platform. On this basis, an analysis was conducted on the stress of each loading part, the simulation results and mechanics calculations have shown the design of the multifunction platform could fully meet each technical index. The on-site applications have revealed that the platforms match with the fully mechanized driving machinery rationally; provide a safety standing basis for the construction of the frame shield support. Further, the platform has improved the mechanization of the frame shield support and increased the support operation efficiency.

Abstract: The characteristic methods involved in underpinning construction are studied in this research. The analysis of the structure is performed with respect to the geotechnical risk and possible retrofitting techniques. In the past several decades, a number of studies mainly focused on base isolation techniques to preserve the structure, but the merits of underpinning technique, geotechnical risk involved, temporary support for safety measures and cost ratio induced were unexpressed. The second generation of research evaluates the measure to reduce ground risk with characterization methods and detailed quality check through construction management system. Current research has pointed out the crucial features of underpinning construction process and its scope in restricted locations and geotechnical perils.

Abstract: This paper gives the comparison of structure and motion characteristics between the new swing-constrain reciprocating piston oil-free air compressor (new compressor) and traditional compressor through mechanism, kinematics and dynamics analysis. By comparison, the new compressor has more parts, more manufacturing and maintenance costs and less machine height that is benefit to reduce storage and transportation cost. Furthermore, reversing knocking strength between piston and cylinder is released ,friction loss is decreased dramatically between seal ring and cylinder and so the service time of seal ring is prolonged.

Abstract: As society became more complex, the logistics also increased, demanding for logistics transport vehicles and feeder has increased. Because the self-weight of skate for cargo transport used in this study is heavy, it needs to be weight lightening. However there is a lack of capital and technology not to improve lasting. We conducted FEM studies about weight lightening applying composites on cargo transport skate and the stiffness can be obtained at the same time. However, due to the presence of discontinuities such as holes in the parts. If you are applying composite, Because this causes the degradation of the strength of the material under static and fatigue load induced stress concentration in parts. In order to examine the safety of the cargo transport skate, you must consider the impact of the static strength damage on the stress concentration because of the discontinuous parts. In this study, therefore, the cargo skate was performed to evaluate the structural analysis through the FEM analysis. As a result, it was found that CFRP compared to existing SM45C is superior 25% when considering the characteristics. It indicated the best results in about 30% of the weight lightening.

Abstract: The reaction of copper 2,2-dichloroacetic acid, heterocyclic diimine (bipy) ligands under mildconditions affords one novel supramolecular complexes, [Cu (bipy)₂[[H₂₂ (bipy=2,2-bipyridine X=dichloroacetic acid). The compounds were constituted through hydrogen bonding and ππ interactions between the heterocyclic rings.

Abstract: The Eu complex C₄H₁₀EuO₁₀ has been synthesized from a hydrothermal reaction and the crystal structure has been determined by means of single-crystal X-ray diffraction. The Eu atom is coordinated by nine O atoms. The molecular structure stabilized by the O-H…O hydrogen-bonding interactions.

Abstract: The spherical cellulose aerogels with core-shell structure were prepared through hanging drop method in a regenerated non-polar solution. The procedures of these aerogels' preparation include solidification in the acetic acid solution to form a hydrogel, solvent exchange with t-butyl alcohol and freeze drying. The spherical cellulose aerogels were obtained with different cellulose solution concentration, and characterized with BET analysis and electron microscopy. Their density and porosity varied linearly with different cellulose content in the initial solution. And the gel shrinkage upon drying was limited to, on average, 7.3%. The density of spherical cellulose aerogel could be reached down to 0.14 g·cm^-3 with high specific surface areas up to 210 m²·g^-1. The mesopores' diameter of spherical cellulose aerogel at the highest peak in the size distribution curve is focus on 15nm.

Abstract: biphenyl Derivative was synthesized by Wittig-Homer reaction. Its crystal structure was determined by X-ray diffraction method. The fluorescence properties of the title compound in solvents were investigated.