Papers by Keyword: Surface Composite Material

Abstract: Al₂O₃-TiC particles reinforced iron matrix functionally gradient material is successfully fabricated by combining the methods of self-propagating high-temperature synthesis (SHS) with casting. The SHS products are analyzed by SEM and XRD and EDS. The results show that the grain size of the particle is round 1μm~3μm, the composition of the Al₂O₃-TiC/ Fe surface composite takes on a gradient distribution from outside to inside, and transforms gradually to the matrix metal. The hardness below 0.5mm from exterior surface of the functionally gradient materials increases dramatically and gradually changes to the hardness of the matrix. Key words: In situ generation; SHS; Casting; Surface composite material; FGM

Abstract: Low-chromium cast iron as the matrix, SiC particles as reinforcement, water glass sand in ordinary dry type, no negative pressure conditions, the use made of composite diffusion agent, prepared the surface of SiC particulate reinforced steel matrix composites. The results show that: SiC particles penetrate the surface of the composite material has excellent wear resistance, with the content of SiC particles increase the wear resistance of composite cast layer increased, when the SiC particle content of 20%, the wear resistance to achieve the best good. The hardness of up to 3000HV composite layer above. Smooth casting surface roughness, dimensional accuracy is more accurate, composite layer and substrate is good.