Papers by Keyword: Synergetic Effect

Abstract: The structure of basic lanthanum orotate (LaOr) were characterized by elemental analysis and infrared spectroscopy. The thermal stability of polyvinyl chloride (PVC) was further studied by Congo red method, oven discoloration method and thermogravimetric analysis. The results showed that LaOr could prolong the oven discoloration time of PVC, and the color was not completely blackened until 120 min. It has a good synergetic effect with dibenzoyl methane (DBM), and the best effect is achieved when LaOr/DBM ratio is 1.8/1.2. The thermal decomposition kinetics experiment showed that adding DBM can effectively improve the activation energy of PVC/LaOr. The stabilization mechanism of PVC was studied by absorbing HCl method and infrared spectroscopy. The results showed that LaOr could not only replace the unstable chlorine atoms on PVC, but also promote the long-term thermal stability of PVC by absorbing HCl.

Abstract: In view of the serious emulsification existing in Changqing condensate gas emulsion, the unclear oil-water interface and the poor application effect of demulsifier used in the field, it is urgent to study an efficient demulsifier. In this paper, PM and XP-1221 two kinds of demulsifiers are used to solve the emulsification problem. The PM demulsifier was compounded with XP-1221 chemical demulsifier to solve the emulsification problem of Changqing condensate. The effect of temperature and demulsifier concentration on demulsification performance was studied by bottle test method. The results showed that XP-1221 and PM could be effectively combined. The demulsification efficiency was high and the dehydrated water was clear. Studies have shown that XP-1221 has a good synergistic effect with PM. The suitable ratio of the composite demulsifier is 1:1, and the demulsifier effect of the demulsifier can meet the requirements of the oil field demulsifier. The composite demulsifier can meet the requirements of current oilfield demulsifiers.

Abstract: The ZnO nanorod was synthesized by the hydrothermal method, and Cu/ZnO nanorod was synthesized by modifying the prepared ZnO nanorod. The TEM was used to characterize the morphology and microstructure for ZnO and Cu/ZnO nanorod. The length of nanorod ZnO was about 700-800 nm, and the diameter about 40-50 nm. There was no change of ZnO in length and diameter when doped with Cu. The degradation of methylene blue (MB) in an aqueous solution under sunlight irradiation was carried out to evaluate the photocatalytic activity. The Cu/ZnO nanorod shows significantly higher photocatalytic activity (99.91%) than ZnO nanorod (89.66%) under sunlight irradiation. The degradation of MB accords with pseudo-first order kinetics, and the appear rate constants kapp of 7% Cu/ZnO nanorod was about 3 times higher than ZnO nanorod. The synergetic effect between ZnO nanorod and Cu on the photocatalytic degradation of MB exists clearly for all the nanorods, and the optimum synergetic effect was found at a weight ratio of 7 wt % (Cu/ZnO). It hoped our works could provide valuable information on the synthesis and application of ZnO-based heterogeneous photocatalysis.

Abstract: A novel chromogenic system of Pb²⁺ with 4, 5- dibromo- o- nitrophenylfluorone (DBONPF) was developed by the synergetic effect of carboxylic carbon nanotubes (c-CNTs) and cationic surfactants CTMAB. The absorption of Pb²⁺ by DBONPF can be improved by the addition of a nano-material and a surfactant. Comparative experiments proved that the absorption of the complex of Pb- DBONPF was increased by 153.9% due to the conjugated system of the c-CNTs and the solubilization of CTMAB. The proposed method was applied to the determination of pb²⁺ in cosmetics satisfactorily

Abstract: The dehydrationrate of Daqing crude oil was not stable and the amount of chemical demulsifier used too much, which caused serious environmental pollution and enlarged the difficulty of dealing with crude oil. Therefore, PRJ-1 bio-demulsifier was selected to combine with chemical demulsifiers SP-169 and GT-D01, respectively, to resolve the crude oil emulsion of Daqing. The results showed that PRJ-1 can combine with SP-169 efficiently. The demulsification efficiency was high and dehydrated water was clear. However, the demulsification efficiency increased a little with GD-D01. The study shows that efficient synergetic effect between PRJ-1 and SP-169 was confirmed. The suitable proportionality of combinational demulsifier is 1:1 and the demulsifying effect can meet requirement of oilfield demulsifiers currently.

Abstract: Abstract. Degradation of reactive brilliant red X-3B (X-3B) by a UV/Mn2+/H2O2/micro- aeration method was investigated. The influencing factors of degradation of X-3B including UV irradiation, aeration, pH value, H2O2 concentration and X-3B concentration were examined. The results show that X-3B was effectively degraded by the UV/Mn2+/H2O2/micro-aeration method. The degradation rate of X-3B was obtained from weighted linear least squares analysis of the experimental data, and accorded with the pseudo-first order kinetics equation.

Abstract: Three different kinds of Al2O3 have been added to HZSM-5 for improving its activity towards selective catalytic reduction of NO with CH4 in the presence of excess of oxygen. Higher conversions of NO have been observed for all of the three mixed catalysts, the conversion of which were also found to be higher than that of each separate component of the catalysts. It was concluded that there exists a synergetic effect between Al2O3 and HZSM-5. The addition of Al2O3 can improve the catalytic activity of HZSM-5 by inhibiting the decomposing of NO2 to NO and accelerating the activation of methane. Adsorbed NO2 is then reduced by the activated methane or the intermediates formed from activated methane to N2 over the Brønsted site of zeolite.