Papers by Keyword: Tangential Firing Boiler

Abstract: By using the computational fluid dynamics software Fluent and the choice of the reasonable mathematical model, the flow, heat transfer and combustion are simulated in a 300 MW tangential firing boiler furnace. In the process of numerical simulation in the furnace, the gas phase turbulent flow usesRealizable model for both sides and solves the governing equations using SIMPLEC algorithm. Calculation results show that the highest temperature in the furnace is in the burner area,the whole furnace space rotates flow field, residual rotation still exists in the exit of the furnace, and the smoke temperature deviation causes in the residual rotation of furnace exit.

Abstract: The characteristics of the WGZ170/9.8-3 pulverized coal boiler were obtained based on cold test，Including the air velocity distribution in tangential firing boiler and the relation between air distribution with opening of each secondary air dampe，The test results had determined that the baffle of blower at around 40% and two parallel draft fan about 45% were relatively appropriate. and the air distribution and opening of each secondary air dampe and balancing the distribution of primary air and second air along the width direction of the boiler hearth were confirmed through test，and the aerodynamic field inside the boiler was investigated based on the tie-floating test．and good aerodynamic field can be obtained after distributing the primary air and second air reasonably，which guarantee the ignition and stable operation of the boiler．