Papers by Keyword: Theoretical Modeling

Abstract: A novel four-chamber rotary compressor (FCRC) is being developed for a refrigerator and an air-conditioning system. The novelty lies in the usage of three rotating sleeves and two oppositely installed vanes each has one end fixed to an outer sleeve and the other end to a rotor, respectively. In this paper, the swept volume, the delivered pressure, the work and the power of the FCRC are formulated and analyzed. The compressor configuration and thermodynamic analysis are based on the 174 cc swept volume with R134a as the compressed gas. Considering the encouraging results, added by design simplicity of mainly cylindrical shaped components, the proposed FCRC is reckoned to be very suitable to be used for air-conditioning and refrigeration applications.

Abstract: This paper introduces a novel two-sleeve rotary compressor (TSRC) concept. The compressor mechanism is basically that of a rotary motion whereby the novelty lies in the usage of two rotating sleeves and a secured vane that has one end fixed to an outer sleeve and the other end to a rotor, respectively. The paper introduces the working principle and thermodynamic model of the TSRC compressor. The swept volume, the delivered pressure, the work and the power of the TSRC are formulated and analyzed. The compressor configuration and thermodynamic analysis are based on the 174 cm³.rev^-1 swept volume with R134a as the compressed gas. The thermodynamic analysis reveals that the TSRC will perform well as refrigerant compressor and can be reliably adopted for refrigeration and air-conditioning applications.

Abstract: The optical structure and working principle of reflection structure fiber optical current sensor was presented, the Jones matrix of Polarizer, wave plate, fiber optical sensor head, theoretical mathematical model of the reflection structure fiber optical current sensor were established. based on the theoretical mathematical model, the polarization error was simulation analyzed, the simulation result shown that to be improve the accuracy of fiber optical current transformer, it should be reduced the polarizer axis angle error, ensure the consistency of the phase modulation for the two beams light, the shaft angle of the wave plate should be controlled within 0°±2°,and phase delay should be controlled within 90°±3°, the influence of linear birefringence effects can be effectively restrained by using a large number of circular birefringence. The simulation results provide a theoretical basis for the realization of reflection structure fiber optical current sensor.

Abstract: Determination of parameters is presented in the modeling of Tm-doped fiber lasers. The thesis chooses parameters, numerical simulation to examine the performance of the laser system for different pump schemes and cavity parameters. Their impacts on the laser performance are discussed.

Abstract: The article focuses on the discussion of size relationship of melt viscosity of ultra-thin wall injection molding, revising the viscosity model of traditional stimulant Cross-WLF. It takes the theory of Uhland wall-slip, trying to analyze the influence which the wall-slip of the molding makes on injection molding. It also points out the limitation of constant heat transfer coefficient in the molding. The change rules of the heat transfer coefficient is among the study. Using the method of numerical simulation and experience, the article verifies the consistency of experience result and the change of the factors, such as using ultra-thin viscosity model, wall-slip and the change of heat transfer coefficient while doing the simulation.