Papers by Keyword: Thermal Barrier System

Abstract: Thermal barrier systems, used for turbine blades, are made of a nickel-based superalloy, a nickel aluminide bond coat layer and a ceramic thermal barrier. The aim of the present work is to study the initial stages of oxidation of the AM1/NiAl(Zr) system. It is currently of prime importance to characterize the initial thin oxide layer that covers the bond coat prior to the topcoat deposition. Indeed, the adhesion of the thermal barrier layer and the lifetime of the system are partly influenced by the substrate pre-heating oxidizing treatment. In order to determine the contribution of zirconium during this intermediate temperature range oxidation, the AM1/NiAl(Zr) system was heat treated at 950°C, in two vacuum conditions, that were close to the industrial ones. The compositions of the extreme surface of the nickel aluminide and of the thermally grown oxide were investigated by Xray photoelectron spectroscopy. In particular, these experiments allowed us to detect zirconium at the surface of the system and to determine its oxidation state.

Abstract: A diffusion barrier based on a NiW electrolytic coating has been developed to limit interdiffusion between a Ni-base superalloy (MCNG) and a β-NiAl bondcoating. Isothermal oxidation tests of 50h at 1100°C confirmed that W-rich layer formed with NiW coating modifies the oxidation behaviour of the bondcoat and limits interdiffusion. The diffusion barrier reduced β-NiAl  γ’-Ni3Al transformation in the bondcoating and prevented SRZ formation.