Papers by Keyword: Thin Steel Sheet

Abstract: Improving the production efficiency is the task with the increasing difficulty. Therefore, it is important to constantly expand the set of tools and perfect the methodology for improving the processes. Some of the losses associated with the negative technological events (breaks, drifting, etc.) are difficult to eliminate completely due to the complexity of making changes to the basic technology. But if you know in advance that the event will occur, you can significantly reduce the probability and consequences, thereby significantly improve the efficiency of the production process. Therefore, it is important to develop and introduce the applied approaches to forecasting the negative technological events in the production processes. This paper presents the method of the forecast-event statistical analysis of the cause-and-effect relationships. The technique was tested on the events of strip’s breakage during rolling at the cold rolling mill 1400 and strip’s drifting in the input storage of the continuous etching unit (CEU). Based on the presented methodology, the specialized digital service was developed and introduced in the production processes of the dynamo steels shop.

Abstract: Crack universally existing underground is an important kind of pores. In order to study the elastic wave propagation in fractured medium through experiment, a new method to make artificial core with certain cracks using oil well cement and camphor sheet or thin steel sheet is put forward. Geometric parameters of the crack, such as shape, size and aspect ratio, are approximately equal to that of camphor sheet or thin steel sheet. Using the thin steel sheet to make crack can be more easy and accurate to control the crack angle than using camphor sheet. The crack opening scales at millimeters. The aspect ratio of cracks formed by camphor sheet ranges from 1.4 to 8, and aspect ratio of cracks formed by thin steel sheet ranges from 2.5 to 70. This method is proved simple and feasible by experiment practice, which can provide artificial cores with certain crack for acoustic wave propagation study.

Abstract: This paper focuses on the analysis of the microstructure and of the texture through the sheet thickness after temper rolling of very thin ferritic steels. The study uses EBSD and X-Ray diffraction. Comparison is made between an interstitial-free (IF) steel and of some industrial low carbon ferritic steels used after ageing. The experimental results are discussed with respect to the anisotropy of the mechanical behaviour after temper rolling during simple shear tests.