Papers by Keyword: Ti-6Al-7Nb

Abstract: Ti-6Al-7Nb is commonly used as orthopedic implant, especially for total hip arthroplasty application, due to its excellency in biocompatibility and surface feature. This study investigates the effects of varying solution treatment temperatures on the mechanical properties and corrosion resistance of the biomedical Ti-6Al-7Nb alloy fabricated using centrifugal investment casting. Solution treatment was performed at 850°C, 970°C, and 1050°C, and the results were evaluated through tensile tests, hardness measurements, microstructural observations, and potentiodynamic polarization tests. The treatment at 970°C produced the optimal combination of mechanical strength and corrosion resistance, achieving a tensile strength of 690 MPa and the lowest corrosion rate of 0.00826 mmpy. The superior performance at 970°C is attributed to the formation of fine α precipitates in the microstructure. These findings highlight the effectiveness of suitable solution treatment temperature in enhancing Ti-6Al-7Nb’s properties for potential use in biomedical applications.

Abstract: Major issues related to implant failure are wear debris and metal ions release where Titanium-Aluminium-Niobium alloys still face those problems despite of better biocompatibility. Surface modification is one of the alternatives in order to reduce those wear as well as ion release problems to the host tissue. In this study, experiments were carried out to investigate the element diffusion behaviour of Ti-6Al-7Nb alloy through thermal oxidation in order to obtain coating on the surfaces for diminishing those effects. Thermal oxidation was carried out at 650°C for three different durations 6, 12 and 24 hours. It is found that at prolong time, Niobium diffusion occurs where short duration Aluminium dominates. This suggests that longer heating time promotes heavy metal diffusion by restricting diffusion of light metal and hence, dominates the heavy metal oxide layer formation. The oxide layer formed on the substrate may lead to increase the lifespan of the implant and reduces the harmful effects caused by wear debris or toxic ion from metal alloys.