Papers by Keyword: Transient Stage

Abstract: This study deals with the modelling of the mechanical behaviour accounting for the expansion induced by the oxygen diffusion in MIECs membrane during semi-permeation transient stage. A dedicated model of chemical expansion and its numerical implementation is used to study the relationship between the mechanical stress and the oxygen flux. The impact of the ratio between oxygen bulk diffusion and surface exchange kinetics on mechanical stress in transient stage is discussed. At last, the need of a compromise between the oxygen flux performance and the mechanical reliability is underlined.

Abstract: Through the analysis of many creep rate-time or creep rate-strain curves of -single phase Ni-20mass% Cr alloy single crystals with various stress axes, it was clarified that the creep deformation manners at lower stresses are drastically different to those at higher stresses. These creep features at lower stresses are summarized into three ones as follows. (i) The fully extended transient stage occupies the considerable ratio of rupture life. (ii) The steady state stage disappears, because the transient stage directly connected with the accelerating stage. (iii) The origin of the onset of accelerating stage is regarded as the formation of the dynamic recrystallized grain. These difference in creep deformation manner were caused by the predominant operation of the primary slip system and then the homogeneous evolution of dislocation substructures.