Papers by Keyword: Transient Temperature

Abstract: The performance of a high speed spindle is mainly attributed to the thermal behavior of spindle bearings. Hence, it is very significant to simulate the thermal behavior of spindle bearings. Finite element analysis is carried out for a typical high speed spindle by considering bearing and motor heat generation under various loading conditions to investigate the transient temperature rise of the spindle assembly. The influence of different cooling arrangements on the thermal behaviour of spindle bearings is then investigated with the objective of minimization of transient temperature fluctuations.

Abstract: The transient temperature field and thermal creep surrounding concrete are analyzed with a three-dimensional FEM model that simulates the construction process of spiral case, based on program development of ABAQUS. The effect of hydration and cooling pipes on temperature is studied. The comparison of temperature difference in schemes is performed, and then the reasonable construction scheme has been defined. The distribution of thermal creep stress with construction is given. It is concluded that the control measures is effective to temperature crack prevention.

Abstract: The transient temperature field and creep of concrete surrounding a spiral case are analyzed with a three-dimensional method, based on ABAQUS. The mechanism of hydration heat and cooling pipes on temperature is studied. The distribution of temperature with construction is given. The effect of temperature on gap between steel liner and concrete is researched. It is concluded that the influence of the measure parameters and temperature is indispensable.

Abstract: The quality of coatings is directly influenced by the flattening and solidification of many individual molten droplets in plasma spray forming, so many properties such as thermal, electrical, mechanical etc are strongly linked to the real contact between the “piled-up” splats. The research on the transient temperature of impacting droplets and the heat transfer between droplets and substrate plays an important role in improving the quality of coatings. Because of complexity and high cost of temperature measurement systems for molten droplet during flattening in plasma spray forming at present, this paper presents a new kind of simulation measurement system for transient temperature of spray droplets when impacting on substrate based on LabVIEW, which could display the real-time changes of the temperature by waveform graph. Finally, the experiments were carried out on Pb-Sn alloy molten droplets to reveal the close connection between the impacting droplets temperature changes and the coatings quality, and the heat transfer between droplets and substrate was discussed.