Effect of Pressure on Microstructure and Properties of High Silicon Electrical Steel by EB-PVD

Abstract:

Article Preview

The effect of pressures on microstructure and properties of as-deposited high silicon electrical steel by EB-PVD during hot pressing was studied. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were used to characterize the phase composition and morphology; the density and electrical resistivity were measured using the bottle method and four-probing method, respectively. It was found that the density increased from 7.25×103 kg/m3 to 7.5 ×103 kg/m3, while the electrical resistivity decreased from 85µΩ•cm to 75µΩ•cm with the increase of the pressure from 30 MPa to 60 MPa.

Info:

Periodical:

Edited by:

Qi Luo

Pages:

348-351

Citation:

X. Li et al., "Effect of Pressure on Microstructure and Properties of High Silicon Electrical Steel by EB-PVD", Applied Mechanics and Materials, Vols. 55-57, pp. 348-351, 2011

Online since:

May 2011

Export:

Price:

$41.00

[1] Y. Takada, M. Abe, S. Masuda, and J. lnagaki: J. Appl. Phys Vol. 64(1988), p.5367.

[2] R. Machado, A. H. Kasama, A. M. J. Jr, C. S. Kiminami, W. J. B. Fo, and C. Bolfarini: Mater. Sci. Eng. A Vol. 449-451(2007), p.854.

[3] W.J. Yuan, J.G. Li, Q. Shen, and L.M. Zhang: J. Magn. Magn. Mater Vol. 320( 2007), p.76.

[4] Y.F. Liang, F. Ye, J.P. Lin, Y.L. Wang, G.L. Chen: J alloy compd Vol. 491( 2010), p.268.

[5] G.K. Tian, X.F. Bi: J alloy compd Vol. 502 (2010), p.1.

[6] X. D. He, X. Li, and Y. Sun: J. Magn. Magn. Mater Vol. 320(2008), p.217.

[7] X. Li, X.D. He, Y. Li, and Y. Sun: Mater. Sci. Forum Vol. 546-549( 2007), p.1813.

[8] Y. G. Wei, B. Q. Xiong, Y. A. Zhang, H. W. Liu, F. Wang, and B. H. Zhu: Trans. Nonferrous Met. Soc. China Vol. 16(2006), p. s1570.

[9] S.B. Horta, W.T. Roberts, and D.V. Wilson: Trans. Metall. Soc. AIME Vol. 245(1969), p.2525.