Coat of Epoxy Resin Filled with Nano-Al2O3 and MoS2 Erosion Wear Resistance and Application

Abstract:

Article Preview

Under the bad environment, high polymer wear-resistant material has more superior erosion wear resistant performance than metal. It can replace wear-resistant metal material partly. In this paper, high polymer wear-resistant coat has been prepared with the epoxy resin, low molecular polyamide, nanoAl2O3 coupling agent. The shear strength and wear resistant test has been carried out under different elements content, and the test curve of coat is given. The results are analyzed. By the experiment result, the optimum coat formula is: low molecular polyamide content is 60% relative to E – 51; and the content of MoS2 is 12%. The result shows that the coat erosion wear resistance is 9 times of 45# steel under the best recipe. The coat is used to repair a worn mortar pump impeller, and the effect is obvious.

Info:

Periodical:

Edited by:

Fangping Zhang

Pages:

40-43

Citation:

C. Yong et al., "Coat of Epoxy Resin Filled with Nano-Al2O3 and MoS2 Erosion Wear Resistance and Application", Applied Mechanics and Materials, Vol. 628, pp. 40-43, 2014

Online since:

September 2014

Export:

Price:

$38.00

* - Corresponding Author

[1] KAYNAK C, CELIKBILEK C, AKOVALI G. Use of silane couplingagents to improve epoxy–rubber interface [J]. Eur Polym J, 2003, 39: 1125–1132.

DOI: https://doi.org/10.1016/s0014-3057(02)00381-6

[2] BUGNICOURT E, GALY J, GERARD J F, et al. Effect of sub-micronsilica fillers on the mechanical performances of epoxy-based composites[J]. Polymer, 2007, 48: 1596–1605.

[3] PASCAULT JP, SAUTEREAU H, VERDU J, et al. Thermosetting polymers [M]. New York: Marcel Dekker, 2002: 391–410.

[4] GOJNY FH, NASTALCZYK J, ROSLANIEC Z, et al. Surface modified multi-walled carbon nanotubes in CNT/epoxy-composites [J]. Chem Phys Lett, 2003, 370: 820–824.