The Effect of Pits on the Curvature Cup: For Reducing Friction in Soft on Hard Sliding Contact

Abstract:

Article Preview

The purpose of this feasibility study is to elucidate the effect of surface modification on the curvature cup made of Acrylonitrile Butadiene Styrene (ABS) against metal ball bearing was investigated. In the tribology soft on hard (SoH), the pits embedded on the curvature cup have shown potential for reducing friction in curvature structure. A modified four ball machine as a hard-on-soft screening machine has been used to evaluate the friction on the curvature cup sample with an inner diameter of 12.8 mm. This study revealed that the treated curvature cup with pit in lubricated of palm oil optimizes the rate of frictional and allows for a stable of soft on hard sliding contact.

Info:

Periodical:

Edited by:

Mazlan Abdul Wahid, Syahrullail Samion, Aminuddin Saat, Nor Azwadi Che Sidik, Normah M. Ghazali, Nazri Kamsah, Azhar A. Aziz, Farid N. Ani, Haslinda M. Kamar and Mohsin Sies

Pages:

489-494

DOI:

10.4028/www.scientific.net/AMM.819.489

Citation:

S. Syahrullail et al., "The Effect of Pits on the Curvature Cup: For Reducing Friction in Soft on Hard Sliding Contact", Applied Mechanics and Materials, Vol. 819, pp. 489-494, 2016

Online since:

January 2016

Export:

Price:

$38.00

[1] L. Canullo, L, G. Rasperini, Preservation of peri-implant soft and hard tissues using platform switching of implants placed in immediate extraction sockets: a proof-of-concept study with 12-to 36-month follow-up. The International journal of oral & maxillofacial implants, 22(6), (2006).

[2] Samion, S., Daud, M. R., Yahya, A., Sapawe, N., Mahmud, N., Hashim, N. L. S., Nugroho, K. Machining Pits on the Curvature Surface Cup Using Spark Process. Jurnal Teknologi, 69(3) (2014).

DOI: 10.11113/jt.v69.3311

[3] Harun, M. N., Wang, F. C., Jin, Z. M., & Fisher, J. Long-term contact-coupled wear prediction for metal-on-metal total hip joint replacement. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 223(7), (2009).

DOI: 10.1243/13506501jet592

[4] Yee, Y., Chun, K., Lee, J. D., & Kim, C. J. Polysilicon surface-modification technique to reduce sticking of microstructures. Sensors and Actuators A: Physical, 52(1), (1996) 145-150.

DOI: 10.1016/0924-4247(96)80140-3

[5] Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. Ti based biomaterials, the ultimate choice for orthopaedic implants–a review. Progress in Materials Science, 54(3), (2009) 397-425.

DOI: 10.1016/j.pmatsci.2008.06.004

[6] Mattei, L., Di Puccio, F., Piccigallo, B., & Ciulli, E. Lubrication and wear modelling of artificial hip joints: A review. Tribology International, 44(5), (2011) 532-549.

DOI: 10.1016/j.triboint.2010.06.010

[7] Edem, D. O. Palm oil: Biochemical, physiological, nutritional, hematological and toxicological aspects: A review. Plant Foods for Human Nutrition, 57(3-4), (2002) 319-341.

DOI: 10.1023/a:1021828132707

[8] Sumathi, S., Chai, S. P., & Mohamed, A. R. Utilization of oil palm as a source of renewable energy in Malaysia. Renewable and Sustainable Energy Reviews, 12(9), (2008) 2404-2421.

DOI: 10.1016/j.rser.2007.06.006

[9] Syahrullail, S., Azwadi, C. S. N., & Seah, W. B. Plasticity analysis of pure aluminium extruded with an RBD palm olein lubricant. Journal of Applied Sciences, 9(19), (2009) 3581-3586.

DOI: 10.3923/jas.2009.3581.3586

[10] Lumor, S. E., & Akoh, C. C. Enzymatic incorporation of stearic acid into a blend of palm olein and palm kernel oil: optimization by response surface methodology. Journal of the American Oil Chemists' Society, 82(6), (2005) 421-426.

DOI: 10.1007/s11746-005-1087-0

[11] Lee, B. H., Abdullah, J., & Khan, Z. A. Optimization of rapid prototyping parameters for production of flexible ABS object. Journal of Materials Processing Technology, 169(1), (2005) 54-61.

DOI: 10.1016/j.jmatprotec.2005.02.259

[12] Trezona, R. I., & Hutchings, I. M. Three-body abrasive wear testing of soft materials. Wear, 233, (1999) 209-221.

DOI: 10.1016/s0043-1648(99)00183-0

[13] Sumer, M., Unal, H., & Mimaroglu, A. Evaluation of tribological behaviour of PEEK and glass fibre reinforced PEEK composite under dry sliding and water lubricated conditions. Wear, 265(7), (2008) 1061-1065.

DOI: 10.1016/j.wear.2008.02.008

[14] Galda, L., Pawlus, P., & Sep, J. Dimples shape and distribution effect on characteristics of Stribeck curve. Tribology International, 42(10), (2009) 1505-1512.

DOI: 10.1016/j.triboint.2009.06.001

[15] Pettersson, U., & Jacobson, S. Friction and wear properties of micro textured DLC coated surfaces in boundary lubricated sliding. Tribology letters, 17(3), (2004) 553-559.

DOI: 10.1023/b:tril.0000044504.76164.4e

[16] Razak, D. M., Syahrullail, S., Yahya, A., Mahmud, N., Hashim, N. L. S., & Nugroho, K. Lubrication on the Curve Surface Structure Using Palm Oil and Mineral Oil. Procedia Engineering, 68, (2013) 607-612.

DOI: 10.1016/j.proeng.2013.12.228

[17] Yunus, R., Fakhru'l-Razi, A., Ooi, T. L., Iyuke, S. E., & Perez, J. M. Lubrication properties of trimethylolpropane esters based on palm oil and palm kernel oils. European journal of lipid science and technology, 106(1), (2004) 52-60.

DOI: 10.1002/ejlt.200300862

[18] Lawal, S. A. A Review of Application of Vegetable Oil-Based Cutting Fluids in Machining Non-Ferrous Metals. Indian Journal of Science and Technology, 6(1), (2013) 3951-3956.

In order to see related information, you need to Login.