Study on a Novel Brazed Diamond Wire with CuSnTi Brazing Filler

Abstract:

Article Preview

Fixed-abrasive wires, such as electroplated diamond wires and resinoid diamond wires, employed for slicing ingots have the problems of high tool wear. A novel brazed diamond wire has been developed to overcome these problems. This paper investigates the effect of process parameters, including brazing temperature, brazing time and brazing filler composition, on the brazed diamond wire manufacturing with CuSnTi brazing filler. The 3D micro-video system was used to observe the brazed diamond wire surface. Tensile, bending and torsional test were carried out to evaluate the mechanical properties of brazed diamond wire. A brazed diamond wire with 3km length was fabricated with the optimization process parameters, which was successfully used to slice glass.

Info:

Periodical:

Edited by:

Akinori Yui, Jiwang Yan and Hideki Aoyama

Pages:

648-653

DOI:

10.4028/www.scientific.net/AMR.1017.648

Citation:

X. H. Zhu et al., "Study on a Novel Brazed Diamond Wire with CuSnTi Brazing Filler", Advanced Materials Research, Vol. 1017, pp. 648-653, 2014

Online since:

September 2014

Export:

Price:

$38.00

* - Corresponding Author

[1] D. Kray, M. Schumann, A. Eyer, G. P. Willeke, R. Kübler, J. Beinert and G. Kleer, Solar wafer slicing with loose and fixed grains, IEEE 4th World Conference on Photovoltaic Energy Conversion. 1-2(2006) 948-951.

DOI: 10.1109/wcpec.2006.279613

[2] T. Enomoto, Y. Shimazaki, Y. Tani, M. Suzuki, Y. Kanda, Development of a resinoid diamond wire containing metal powder for slicing a slicing ingot, Ann. CIRP, 48 (1) (1999) 273-276.

DOI: 10.1016/s0007-8506(07)63182-5

[3] Y. Chiba, Y. Tani,T. Enomoto, H. Sato, Development of a high-speed manufacturing method for eleetroplated diamond wire tools.Ann. CIRP, 1(52) (2003)281-284.

DOI: 10.1016/s0007-8506(07)60584-8

[4] J.F. Meng, J.F. Li, P.Q. Ge, W. Gao, Removal mechanism in wire-sawing of hard-brittle material, Materials Science Forum, 471-472 (2004) 192-196.

DOI: 10.4028/www.scientific.net/msf.471-472.192

[5] S. Li, B. Xiao, F.L. Zhang, B. Wang, Research on manufacturing technique of cutting aluminum alloy thick plate by brazed diamond wire saw. Machine Building & Automation, 38(3) (2009)87-89.

DOI: 10.4028/www.scientific.net/amr.426.218

[6] B. Wang, B. Xiao, S. Li, Research on tensile properties of induction brazing diamond wire saw. Machine Building & Automation, 39(4) (2010)27-29.

[7] L.L. Su, Research on the fabrication of brazing diamond wire and its surface uniformity. Master Dissertation, Huaqiao University, (2013).

[8] F. Yin, Temperature effects on the properties of brazed diamond wire saw, Master Dissertation, Huaqiao University, (2013).

[9] Y.P. Li, H. Huang, X.P. Xu, Development evaluation of mechanical properties of brazed diamond wire, Solid State Phenomena, 175 (2011) 294-299.

DOI: 10.4028/www.scientific.net/ssp.175.294

In order to see related information, you need to Login.