Surface Finishing Technology and Surface Engineering II

Volume 135

doi: 10.4028/

Paper Title Page

Authors: Quan Cheng, X.J. Zhu, Jian Qing Wang, Zhi Meng Lu

Abstract: Surface-supporting length ratio tp is one of the most important parameters to judge the cylinder liner’s surface quality, which has the...

Authors: Tao Yu, Yu Xia Qian, Ke Dong, Su Yu Wang

Abstract: The gear honing process is a widely used process for gear finishing after heat-treated, and may be divided into the variants “internal-tooth...

Authors: Fei Hu Zhang, Xing Bin Yu, Yong Zhang

Abstract: Ultrasonic-magnetorheological combined (UMC) finishing is a new technique for the ultra precision machining of aspheric surfaces, especially...

Authors: Yang Zhi Chen, Lei Hou Sun, Di Wang, Yong Qiang Yang, Jiang Ding

Abstract: The Selective Laser Melting (SLM) technique was investigated for manufacturing of Space-Curve-Meshing-Wheel (SCMW) samples by using of...

Authors: Guo Xing Liang, Ming Lv, Xiao Xu Gao

Abstract: In the paper, the vector expression of cutting speed on the contact-points has been obtained by the coordinate transformation. The cutting...

Authors: Shao Hui Yin, Heng Ning Tang, Jian Wu Yu, Kun Tang, Feng Jun Chen, Zhi Qiang Xu, Jian Bo He

Abstract: This paper deals with one-point parallel grinding and magnetorheological finishing (MRF) polishing of micro glass lens mould. Firstly,the...

Authors: Xiao Cun Xu, Yan Gang He, Xiang Kai Xin, Bing Lin

Abstract: Since almost large die surfaces are free-form surfaces, currently, these are almost manually implemented. In order to overcome this barrier,...

Authors: Bin Shen, Fang Hong Sun, Guo Dong Yang

Abstract: The friction behaviors of CVD diamond films on silicon nitride substrates are investigated comparing with the uncoated silicon nitride...

Authors: Wen Hui Li, Sheng Qiang Yang, Xiu Hong Li

Abstract: For the precise hole surface, the burr severely affects products’ performance. Considering the specific conditions of the precise hole...

Authors: Ying Qiang Xu, Tao Zhang, Yu Mei Bai

Abstract: Grinding induces tensile residual stresses, which can play an adverse role on the fatigue and wear resistance of the component. In this...


Showing 21 to 30 of 87 Paper Titles