High Speed Machining

Volume 188

doi: 10.4028/www.scientific.net/AMR.188

Paper Title Page

Authors: J. Du, Zhan Qiang Liu

Abstract: FGH95 is one kind of high-strength, thermal-resistant nickel-based superalloys fabricated by powder metallurgy (PM). It plays an...

Authors: W.J. Zheng, Hong Jie Pei, Gui Cheng Wang, C.G. Shen

Abstract: In order to study the mechanism of cutting fluid penetration during minimum quantity lubrication (MQL) machining, the flow field in cutting...

Authors: Chun Gen Shen, Gui Cheng Wang, S.L. Wang, W.W. Nie, G. Liu

Abstract: The mode analysis of the HSK tool system structure is the base for determining HSK high speed spindle-tool system dynamic performances. In...

Authors: Bin Jiang, Yin Jin Yang, Xian Li Liu, Chang Xing Qi, Xing Fa Zhao

Abstract: In high speed ball-end milling hardened steel, the increase of hardened steel hardness and cutting efficiency make cutting loads changing,...

Authors: Xin Qiang Zhuang, Chuan Zhen Huang, Zi Ye Liu, Bin Zou, H.L. Liu, H.T. Zhu

Abstract: The milling experiments of the annealed T10A steel were carried out in the various cutting conditions using the coated cemented carbide...

Authors: Zhi Jun Zhang, J.Q. Li, Shu Tao Huang

Abstract: From the research of the mechanical behavior of the carbon steel in the super high-speed cutting state and then obtaining the microstructure...

Authors: Li Fu Xu, Li Zhou, Xiao Lin Yu, Shu Tao Huang

Abstract: In this paper, grinding experiments on the machining of SiCp/Al composites using SiC grinding wheel have been carried out. The effect of the...

Authors: Guo Feng Wang, K.H. Zhang, Shuang Lu, C.L. Hong

Abstract: In order to research the feasibility of staining method in measuring the acoustic field intensity, we study the mechanism that dye spots...

Authors: Q.L. Zhang, Cheng Yong Wang, Ying Ning Hu, Yue Xian Song

Abstract: High speed milling (HSM) on inclined plane is the basic process of die and mould. The dynamic characteristics of the process are...

Authors: Hong Qun Tang, Cheng Yong Wang, Bing Wang, F. Su, Ping Ma, Yue Xian Song

Abstract: The target of this paper is to design a high speed drilling machine suitable for printed circuit board with micro-hole of 0.1 mm diameter,...


Showing 11 to 20 of 142 Paper Titles