High Speed Machining

Volume 188

doi: 10.4028/www.scientific.net/AMR.188

Paper Title Page

Authors: Guo He Li, Min Jie Wang

Abstract: Orthogonal cutting experiments of Fe-36Ni invar alloy are performed to investigate the influence of cutting conditons on adiabtic shear,...

110
Authors: Francisco Javier Campa, Luis Norberto López de Lacalle, Gorka Urbicain, Aitzol Lamikiz, Sébastien Seguy, Lionel Arnaud

Abstract: A common problem in the aeronautical industry is the chatter vibration due to the lack of dynamic stiffness in the milling of thin walls and...

116
Authors: Liang Wang, Jian Guo Zhang, Bin Shen, Fang Hong Sun

Abstract: CVD diamond films are deposited on cobalt cemented tungsten carbide (WC-Co) endmills using hot filament chemical vapor deposition (HFCVD)...

122
Authors: Philip Mathew

Abstract: A variable flow stress machining theory is described where it is used to predict the cutting forces associated with High Speed Machining...

128
Authors: X.H. Yu, Guo Qin Huang, Cong Fu Fang, Hui Huang, H. Guo, Xipeng Xu

Abstract: An investigation is reported on the temperature in grinding of titanium alloy (TC4) by using a vitrified CBN wheel at grinding speed up to...

134
Authors: Shu Cai Yang, Min Li Zheng, Yi Hang Fan, W. Xu

Abstract: Simulation models of both dynamic cutting forces and cutting temperatures considering effects of tool rounded cutting edge are established...

139
Authors: Bin Jiang, S.C. Yang, Yin Jin Yang, Min Li Zheng, P. Sun

Abstract: Aim at the uncertainty of vibration behavior in high speed ball-end milling hardened steel, carried out the experiment of high speed milling...

145
Authors: Shi Wu, D.K. Jia, X.L. Liu, Y.C. Jiang, Y.F. Li

Abstract: In this paper, modal analysis of ball end mills is modeled by finite element to work out natural frequency and chatter model in tooling...

150
Authors: Wei Ji, Yi Wen Wang, Y.F. Li, F.G. Yan, X.L. Liu

Abstract: Microcosmic and macroscopic form of CFRP holes drilled by new PCD tool were observed in this paper. Location and distribution of burr and...

154
Authors: K.E. Qing, Yi Wen Wang, Li Jia Liu, Z.R. Zhang, Z.Q. Yu

Abstract: According to the problem of chip shape monitoring in machining process, this paper presents a methods of the recognition of shape based on...

158

Showing 21 to 30 of 142 Paper Titles