High Speed Machining

Volume 188

doi: 10.4028/www.scientific.net/AMR.188

Paper Title Page

Authors: L. Zhou, Yong Ze Guo, Z.R. Liao, X.R. Liang, G.Q. Pan

Abstract: Comparing advantages and disadvantages of Oliver-Pharr method, microhardness method and indentation energy method, this article propses the...

356
Authors: M.H. Wang, Shu Tao Huang

Abstract: . In this study, the prediction models of thrust force, tool wear and torque in drilling nickel-based alloy GH536 are developed based...

360
Authors: Li Fu Xu, J. Chen, Shu Tao Huang, Li Zhou

Abstract: In this paper, a polycrystalline diamond drill was designed to machine non-ferrous difficult-to-machine materials. The effect of the...

364
Authors: H.L. Zhang, H. Guo

Abstract: In the present paper, a three-dimensional finite element model was used for simulating the grinding force at different cutting conditions....

368
Authors: H.L. Zhang, Jin Chen

Abstract: Drilling is one of the complex machining processes, which has been widely applied in the manufacturing area. In this paper, a 3D coupled...

372
Authors: Xi Bing Li, X.L. Liu, Z.M. Shi, Q.M. Hu, S.G. Wang

Abstract: With the rapid development of static-press technique, multi-point constant oil supply system has been widely applied into bearing the work...

376
Authors: Hai Jun Hu, Ya Zhou Sun, Z.S. Lu

Abstract: The machining-induced residual stresses are strongly dependent on the work-piece material and the chosen process parameters. A 2D finite...

381
Authors: Yu Ping Ma, Gen Fu Yuan, M. Chen

Abstract: Ultrafine grain composite diamond films are deposited on the WC-Co-based drills using a bias-enhanced hot filament CVD system. During the...

387
Authors: Ying Fei Ge, Jiu Hua Xu, Yu Can Fu

Abstract: Polycrystalline diamond (PCD) tools were used in high speed machining of SiCp/2009Al and TiCp/TC4 composites. The results showed that...

392
Authors: Chun Hui Ji, Zhan Qiang Liu

Abstract: Many workers all over the world suffer significant hearing loss as well as psychological and physical stress as a result of exposure to high...

398

Showing 71 to 80 of 142 Paper Titles