Modelling of Machining Operations

Volume 223

doi: 10.4028/www.scientific.net/AMR.223

Paper Title Page

Authors: Aviral Shrot, Martin Bäker

Abstract: A material model is a prerequisite to the modelling of machining processes. Owing to its versatility, the Johnson-Cook model is commonly...

277
Authors: Cédric Courbon, Tarek Mabrouki, Joël Rech, Denis Mazuyer, Enrico D'Eramo

Abstract: The present work proposes to enhance the thermal interface denition in Finite Element (FE) simulations of machining. A user subroutine has...

286
Authors: Murat Demiral, Tõnu Leemet, Mikko Hokka, Veli Tapani Kuokkala, Anish Roy, Vadim V. Silberschmidt

Abstract: Ti-based alloys are extensively used in aerospace and other advanced engineering fields due to their high strength and toughness, light...

296
Authors: E. Kwiatkowska, Piotr Niesłony, W. Grzesik

Abstract: The development of an accurate model for the shear and normal stresses on the rake face is very important for modeling of the metal cutting...

304
Authors: Gaetano M. Pittalà, Michele Monno

Abstract: The machining of titanium alloys is critical also because of high temperature reached at the tool nose. The temperature of the cutting tool...

314
Authors: Yang Guo, Christopher Saldana, James B. Mann, Rachid M'Saoubi, Srinivasan Chandrasekar

Abstract: Deformation history and state of chip and machined surface in low-speed cutting have been characterized using image analysis, complemented...

325
Authors: Patrícia Alves Barbosa, Izabel Fernanda Machado

Abstract: Machining is characterized by a large amount of localized plastic strain on material due to chip formation; hence, there is a commitment...

332
Authors: Paolo Claudio Priarone, Stefania Rizzuti, Giovanna Rotella, Luca Settineri

Abstract: Gamma-titanium aluminides present an attractive combination of low density, high melting temperature, good oxidation and burn resistance,...

340
Authors: Ivandro Bonetti, Valter Vander Oliveira, Adriano Fagali Souza

Abstract: Nowadays there has been noticeable an expressive technological development in the cutting process to machine moulds and dies, through...

350
Authors: S.V. Ramana, K. Ramji, B. Satyanarayana

Abstract: The pin on disc (POD) tests revealed an inverse relationship between coefficient of friction and the particle size of boric acid. So, as the...

359

Showing 31 to 40 of 101 Paper Titles