Modelling of Machining Operations

Volume 223

doi: 10.4028/www.scientific.net/AMR.223

Paper Title Page

Authors: Volker Schulze, Jürgen Michna, Frederik Zanger, Rüdiger Pabst

Abstract: Cutting processes lead to mechanical and thermal loading of tool and work piece. This loading entails a direct influence of the cutting...

371
Authors: Gianluca D'Urso, Aldo Attanasio

Abstract: The present paper reports the results obtained investigating surface work hardening in turning as a function of cutting speed, feed rate and...

381
Authors: Nicolas Guillemot, Benoît Beaubier, Tarek Braham, Claire Lartigue, René Billardon

Abstract: The objective of this study is to predict the residual stresses induced by ball-end milling using an hybrid approach based on a numerical...

391
Authors: Durul Ulutan, Mohammad Sima, Tugrul Özel

Abstract: In this study, the feasibility of predicting surface integrity and residual stresses by using elasto-viscoplastic finite element simulations...

401
Authors: Alexandre Mondelin, Frédéric Valiorgue, Joël Rech, Michel Coret, Eric Feulvarch

Abstract: This study presents the development of a numerical model for the prediction of residual stresses induced in finish turning of a 15-5PH...

411
Authors: Ivan Torrano, Oscar Barbero, Aitor Kortabarria, Pedro Jose Arrazola

Abstract: Heat-resistant alloys like Inconel 718 are used in critical components such as aircraft engine turbine discs. Surface integrity is a...

421
Authors: Aldo Attanasio, Elisabetta Ceretti, Cristian Cappellini, Claudio Giardini

Abstract: In cutting field, residual stress distribution analysis on the workpiece is a very interesting topic. Indeed, the residual stress...

431
Authors: Zheng Wen Pu, Serafino Caruso, Domenico Umbrello, O.W. Dillon, D.A. Puleo, I.S. Jawahir

Abstract: Surface integrity of machined products can have a critical impact on their performance, such as corrosion, wear and/or fatigue resistance....

439
Authors: André Marcon Zanatta, Jefferson De Oliveira Gomes, José Divo Bressan, Celso Antonio Barbosa

Abstract: The aim of this study was to evaluate the influence of tool flank wear on polishability and wear resistance of mold steel. Two surfaces of...

449
Authors: Bei Zhi Li, Xiao Hui Jiang, Huai Jing Jing, Xiao Yan Zuo

Abstract: With FEM software of AdvantEdge, a model was created to analyze cutting force and thermal in the high-speed milling process, this model...

456

Showing 41 to 50 of 101 Paper Titles