Study on Techniques of Elastic Clamping and Plastic Cutting

Abstract:

Article Preview

Deformation problem is solved, using approach of elastic clamping in metal machining process, The way eliminate deformation of part that was given rise to because of very large clamping force; It Improves the accuracy of parts. Plastic cutting is the use of plastic deformation behavior of materials, It not only was used to control cutting force to reduce energy consumption in metal processing, and as much as possible to eliminate the work hardening phenomenon, but also minimize the possibility of plastic deformation of tool, increased tool life. Used the tensile test of materials of 2Cr13, It was on the basis of determining limit values of the clamping force and cutting force in the cutting spindle; It was based on the experimental stress values; through test of cutting of spindle of materials of 2Cr13. It was verified that technology of the elastic clamping and plastic cutting not only can greatly improve of accuracy and efficiency of machining of the parts, but also as the necessary conditions of realization of part of trace, high-speed, precision cutting.

Info:

Periodical:

Advanced Materials Research (Volumes 239-242)

Edited by:

Zhong Cao, Xueqiang Cao, Lixian Sun, Yinghe He

Pages:

1405-1408

Citation:

Y. Y. Liu "Study on Techniques of Elastic Clamping and Plastic Cutting", Advanced Materials Research, Vols. 239-242, pp. 1405-1408, 2011

Online since:

May 2011

Authors:

Export:

Price:

$38.00

[1] Lijun WANG, Wei YU, Huibin WU, et al. Hot deformation behavious and mathematical model of 12nNiVR steel[J]. Heat Treatment of Metals, 2010, 35(7): 5-8. (in China).

[2] Hui-zhen WANG, Yun-kai LI, Shu-kui LI, et al. Effect of tempering temperature on mechanical properties of 83 steel[J]. Transactions of Materials and Heat Treatment, 2010, 31(9): 77-82. (in China).

[3] Feng NIU, Zheng-zhi ZHAO, Ai-min ZHAO,et al. Effects of Continuous Annealing Parameters on Microstructure and Mechanical Properties of Ultra-high strength Dual Phase Steel[J]. Materials for Mechanical Engineering, 2010, 34(9): 23-26. (in China).

[4] Abbasi S M, Shokuhfar A. Prediction hot deformation behaviour of 10Cr-10Ni-5Mo-2Cu steel[J]. Materials Letters, 2007, 61: 2523-2526.

DOI: https://doi.org/10.1016/j.matlet.2006.09.050

[5] Farnoush H, Momeni A, Dekghani K, et al. Hot deformation characteristics of 2205 duplex stainless steel based on the behaviour of constituent phases[J]. Materials & Design, 2010, 31(1): 220-226.

DOI: https://doi.org/10.1016/j.matdes.2009.06.028

[6] Momeni A, Dehghani K, Keshmiri H, et al. Hot deformation behavior and microstructural evolution of a superaustenitic stainless steel[J]. Materials Science and Engineering A, 2010, 527: 1605-1600.

DOI: https://doi.org/10.1016/j.msea.2009.10.051

[7] Mingjun CHEN, Shen DONG, Dan LI, et al. Study of ultra-precision grinding of plastic section of Silicon brittle material[J], Aviation Precision Manufacturing Technology, 2000, 36(2): 8-11. (in China).

[8] Jianping SUN, Kaiguo FAN, Zhuoyin JING, et al. The Precise Measurement of Linear Expansion Coefficient for Materials with Laser Interferometric Dilatometer[J]. Acta Metrologica Sinica, 2008, 29(4A): 164-167. (in China).

[9] Hu ZHOU, Jianguo YANG, Mei CHEN. Design ang analysis of ultra-precision feeding system based on piezoeletric ceramics[J]. Journal of Machine Design. 2010, 27(8):23-27. (in China).

[10] Xiaoli LI, Wei CHEN,Rong YAN. Adaptive compensation of contour errors based on BP neural networks[J]. Chinese Mechanical Engineering, 2010, 21(16): 1902-1906. (in China).

Fetching data from Crossref.
This may take some time to load.