Research of the Best Combination of Cooling Parameters in High Temperature Work Deep Stope


Article Preview

When designing cooling engineering in deep stope, the three parameters, air temperature, air velocity and distance between cooling air and work place, are three key factors to determine cooling effect. Lowering air temperature, increasing air velocity and shortening the distance between cooling air and work place can all achieve the purpose of cooling work place. Not only to achieve the purpose of cooling, but also to reduce operating costs, save energy and extend the service life of cooling equipments, these three parameters should be chosen and combinated rationally, to gain the fine operation conditions. Taking 7446 work face in Jiahe coal mine as an example, on the base of analysis of multiple sets of cooling parameters in a variety of conditions, it proposes the range of parameters which can gain better cooling effect, more economical run and longer cooling equipments service life. It provides a wider choice of reasonable parameters for 7446 work face cooling engineering.



Advanced Materials Research (Volumes 255-260)

Edited by:

Jingying Zhao






Y. Zhang et al., "Research of the Best Combination of Cooling Parameters in High Temperature Work Deep Stope", Advanced Materials Research, Vols. 255-260, pp. 3832-3838, 2011

Online since:

May 2011




[1] Yongyi Guo, Shiyue Wu: Thermal and Air Conditioning in Mines(Coal Industry Press, Beijing 1997), in Chinese.

[2] Yihui Zhao: Mine Ventilation and Air Conditionin( China University of Mining and Technology Press, Xuzhou 1990), in Chinese.

[3] Binquan Wang, Shixun Zuo, Changcai Luan: Mining Industry Health. ( China University of Mining and Technology Press, Xuzhou 1990), in Chinese.

[4] Zhang yi. Mechanism of Deep Heat Damage and its Control Measures in Jiahe Caol Mine[D]. China University of Mining and Technology in Beijing, 2007.

[5] Hanghua Hu, Desheng Gu: Journal of China Coal Society Vol. 33(200), pp.318-321.

[6] Zaichun Zhao, Danren Peng: Safety In Coal Mines Vol. 6(1994), pp.14-16.

[7] Danren Peng, Zaichun Zhao: Coal, Vol. 7(1998), pp.2-4.

[8] C. T. Lynch. Handbook of Materals science. Vol. 1. General properties, CRC. Press, Inc. (1979).

[9] Danren Peng, Quanfu Zhao, Lan wenHu, et al.: Mining Safety & Environmental Protection, Vol. 27(2000), pp.16-18.

[10] Written by Doerteman. Translated by Jiang hu-yan, etc: Physical Properties of Rock and Minerals (Science Press, Beijing 1985) , in Chinese.

[11] W.D. Kingery, in: The Thermal Conductivity of Geramic Dielectries , edtied by Germic. Vol. 2. Pergamon Press, New York(1962), in press.

[12] Shizhou Chen, Xiao-jun Ni: China Journal of Highway and Transport, Vol. 18(2005) , pp.56-60.

[13] Yun-shan Teng, Gang Cheng: Energy Conservation Technology, Vol. 6(1994), pp.16-23.

[14] Safety Rules for Coal Mine 2001: State Administration of Coal Mine Safety(Coal Industry Press , Beijing 2001), in Chinese.

[15] (Soviet Union) written by A.H. shierbaha, O.A. kelimunufu, etc. translated by Han-wen Huang: Mine Cooling Guide(Coal Industry Press, Beijing) , in Chinese.

In order to see related information, you need to Login.