Dynamic Recrystallization during Hot Extrusion in AZ31 and AZ80 Alloys


Article Preview

Dynamic recrystallization behavior that occurs during the hot extrusion was examined in two commercial Mg alloys, AZ31 and AZ80 alloys. The initial grain size, d0, and the dynamically recrystallized grain size, drec, after the extrusion was investigated using optical microscopy. The dynamically recrystallized grain size decreased with an increasing the Zener-Hollomon parameter.



Advanced Materials Research (Volumes 26-28)

Edited by:

Young Won Chang, Nack J. Kim and Chong Soo Lee




M. Honda et al., "Dynamic Recrystallization during Hot Extrusion in AZ31 and AZ80 Alloys", Advanced Materials Research, Vols. 26-28, pp. 449-452, 2007

Online since:

October 2007




[1] K. Kubota, M. Mabuchi, K. Higashi: J. Mater. Sci. Vol. 34 (1999), pp.2255-2262.

[2] H. Somekawa, T. Mukai: Scr. Mater. Vol. 53 (2005), pp.1059-1064.

[3] H. Somekawa, A. Singh, T. Mukai: Phio. Mag. Letters. Vol. 86 (2006), pp.195-204.

[4] T. Mukai, M. Yamanoi, H. Watanabe, K. Higashi: Mater. Trans. Vol. 42 (2001), pp.2652-2654.

[5] M. Mabuchi, K. Kubota, K. Higashi: Mater. Trans, J Vol. 36 (1995), pp.1249-1254.

[6] H. Watanabe, T. Mukai, S. Kamado, Y. Kojima and K. Higashi: Mater. Trans. Vol. 44, (2003), pp.463-467.

[7] M. Mabuchi and K. Higashi: Acta Mater., 44(1996), p.4611.

[8] H. Watanabe, H. Tsutsui, T. Mukai, K. Ishikawa, Y. Okanda, M. Kohzu, and K. Higashi: Mater. Trans. Vol. 42 (2001), pp.1200-1205.

[9] H. J. Frost and M. F. Ashby: Deformation-mechanism Maps, (Pergamon Press, Oxford, 1982), p.44.

Fetching data from Crossref.
This may take some time to load.