Effect of Multiple-Binders on Properties of Al2O3-Based Ceramic Foam Filter


Article Preview

In this paper,Al2O3 ceramic foam filters prepared by polyurethane sponge impregnation.The effect of multiple binders on properties of ceramic foam was studied . The results show that using 90g dihydrogen phosphate and 30g under the CMC 1350°C sintered alumina matrix ceramic foam filters are the best performance. The compressive strength of the Al2O3-based foam ceramics prepared with optimal multiple-binder and sintered at 1350°C could reach up to 1.697MPa. At the same time,it is obtained through test that the thermal shock times of sintered samples reached 5 by staying at 1100°C for 10 min.



Advanced Materials Research (Volumes 476-478)

Edited by:

Wenzhe Chen, Qiang Li, Yonglu Chen, Pinqiang Dai and Zhengyi Jiang




Z. H. Ma and P. F. Zhao, "Effect of Multiple-Binders on Properties of Al2O3-Based Ceramic Foam Filter", Advanced Materials Research, Vols. 476-478, pp. 1003-1006, 2012

Online since:

February 2012




[1] Saggio-Woyansky J, and Scott C E, Minnear W P: Am Ceram Soc Bull, 1992, 71(11): 1674-1682.

[2] Sepulveda P: Am Ceram Soc Bull, 1997, 76(76): 61-65.

[3] Colombo P, and Hellmann J R:Mater Res Innovat, 2002, 6: 260-272.

[4] Zeachky C, and Goetz-Neunhoeffer F. Neubauer J: Comp Sci Technol, 2003, 63(16): 2361-2370.

[5] Shengshan Feng, and Juqiao Chen: Refractory materials, 2002, 36(4): 235-239(In Chinese).

[6] Qingzhu Wu, Yongxian Liu, and Fu Gong Li : Ceramics, 2002, (2): 12-14(In Chinese).

[7] Muhamad Nor M.A. A: J Mater. Process[J]. Tech. (2008), doi: 10. 1016/j. jmatprotec. 2007. 12. 099.