Manufacturing Science and Engineering I

Volumes 97-101

doi: 10.4028/www.scientific.net/AMR.97-101

Paper Title Page

Authors: Xiu Li Zhang, Yi Ming Mi, Tao Ji, Hong Xia Xu, Yan Ting Xie, Ying Shen

Abstract: Using the commercial code ANSTS/LS-DYNA, this study has established a Split Hopkinson Pressure Bar (SHPB) finite element model (FEM) of X70...

278
Authors: Zhi Qiang Zhang, Zhong Chao Ye, Yi Sheng Zhang, Li Jian

Abstract: Hot stamping of ultra high strength steel offers the possibility to reduce the weight of automobiles, while meeting the safety requirements....

282
Authors: Jun Cai, Fu Guo Li, Min He, Peng Chen

Abstract: Isothermal forging die plays an increasing important role in plastic forming. During isothermal forging process, die bears high and...

286
Authors: Shu Li Sun, Min Gang Zhang, Wen Wu He

Abstract: Hot-compression and hot-tension experiments were conducted on a Gleeble-1500D thermal-mechanical simulator. The constitutive equation was...

290
Authors: Guang Fan Gao, Guo Dong Wang, Xin Wei Ding, Jiang Jun Chen

Abstract: With attention concentrated on the pole of bulge profile, tensile instability which results in the fracture of forward acting rupture discs...

296
Authors: Hong Zhen Guo, Xiao Yan Wang, Zhao Long Zhao, Tao Wang, Ze Kun Yao

Abstract: In this paper the effect of isothermal forging process parameters on the microstructure and the mechanical properties of...

301
Authors: Xiang Lin Yin, Yi Tao Yang, Yu Peng Shao, Guang Jie Shao

Abstract: The non-dendritic of A356 aluminum alloy billet was reheated to meet the requirements of the semi-solid microstructure by three different...

306
Authors: Ming Jun Liu, Bai Liu, Fei Tang

Abstract: The drawing scheme of a silencer cover in the progressive die was studied. This cover was formerly processed by several single punching dies...

311
Authors: Bai Liu, Yong Quan Zhou, Ming Jun Liu, Zhen Yu Zhao

Abstract: Based on Finite Element Analysis (FEA) module of Dynaform software, the paper made numerical simulation of a motor cover’s stamping process...

315
Authors: Gang Yao Zhao, Yu Li Liu, He Yang

Abstract: The rotary-draw bending process of thin-walled rectangular tube is a complex process with large deformation, large displacement and finite...

320

Showing 61 to 70 of 980 Paper Titles