Advanced Inorganic Fibrous Composites V

Volume 50

doi: 10.4028/

Paper Title Page

Authors: Konstantin von Niessen, Martin Wenzelburger, Rainer Gadow

Abstract: Advanced continuous fiber reinforced light metal matrix composites (MMC) are manufactured using thermally sprayed prepregs and subsequent...

Authors: Roger R. Naslain

Abstract: Ceramic matrix composites (CMCs) comprise a fiber reinforcement embedded in a ceramic matrix, the two main constituents being bonded...

Authors: Shao Ming Dong, Yu Sheng Ding, Zhen Wang, Qing Zhou, Xiang Yu Zhang, Dong Liang Jiang, Akira Kohyama

Abstract: Hot pressing is an effective way to densify powder compacts, especially during the inclusion of a second phase, such as particles, whiskers...

Authors: G. Stantschev, Martin Friess, Walter Krenkel

Abstract: Ceramic matrix composites (CMCs) were manufactured via polymer infiltration and pyrolysis) PIP process. In order to improve the performance...

Authors: N. Eberling-Fux, R. Pailler, A. Guette, Sebastien Bertrand, Eric Philippe

Abstract: 3D woven carbon fibre preforms (~ 2 mm thickness) were impregnated with single or mixture of non oxide ceramic nanoscale powders in...

Authors: Gerard Vignoles

Abstract: The chemical vapour infiltration (CVI) process is used to fabricate the interphases and matrices of CMCs. This process involves complex...

Authors: W.G. Zhang, Yong Ping Zhu, K.J. Hüttinger

Abstract: Isothermal, isobaric chemical vapor infiltration of carbon fiber felts with fiber volume fractions of 7.1% and 14.2% were investigated at...

Authors: K.D. Frischknecht, R.J. Diefendorf

Abstract: Lasers have been used to chemically vapor deposit materials since the 1970’s. The fine focus achievable with the laser beam allows...

Authors: David Hui, Maksim Kireitseu, Geoffrey R. Tomlinson, Vladimir Kompis

Abstract: Nanoparticles and carbon nanotubes-containing composites were deposited on a metal substrate by a micro-arc oxidizing technique. The...

Authors: Roland Weiss

Abstract: Ceramic Matrix Composites (CMC) have a wide interest for high temperature applications. The materials can be modified by the selection of...


Showing 11 to 20 of 25 Paper Titles