12th INTERNATIONAL CERAMICS CONGRESS PART C

Volume 64

doi: 10.4028/www.scientific.net/AST.64

Paper Title Page

Authors: Yahya Kemal Tür, Ali Özer, Cihangir Duran

Abstract: Cr3C2-NiCr type cermets are used in cutting technology for their low sintering temperatures and relatively low densities. Their high...

59
Authors: Toshiro K. Doi, Tsutomu Yamazaki, Syuhei Kurokawa, Yoji Umezaki, Osamu Ohnishi, Yoichi Akagami, Yasuhide Yamaguchi, Sadahiro Kishii

Abstract: While investigating polishing mechanism of glass substrates with ceria abrasives (CeO2), we found its oxidizing properties worked...

65
Authors: Mark Hadfield, Wei Wang, Andrew Wereszczak

Abstract: Silicon nitride is a type of engineering ceramic which has been used in ball bearing and other rolling contact applications owing to its...

71
Authors: Hichem Khedim, Andrew J. Connelly, Hélène Nonnet, Daniel Coillot, François Mear, Lionel Montagne

Abstract: Research into hydrogen production using high temperature electrolysis methods has increased significantly in the last few years....

76
Authors: Chihiro Iwamoto, Shunichiro Tanaka

Abstract: In-situ HRTEM technique was applied to various substrates and the reaction processes between substrates and molten alloy were compared....

83
Authors: Sung M. Hong, Christopher C. Bartlow, Thomas B. Reynolds, Noritaka Saito, Andreas M. Glaeser

Abstract: Interlayer designs and processing conditions that promote rapid and reliable transientliquid- phase (TLP) bonding/joining of Al2O3 and...

88
Authors: Maria Luigia Muolo, Fabrizio Valenza, Natalia Sobczak, Alberto Passerone

Abstract: The ultra high temperature performance of ceramic-based complex structures may require the development of liquid-assisted joining...

98
Authors: Wolfgang Tillmann, Lukas Wojarski, Benjamin Lehmert

Abstract: The availability of adequate joining technologies is of major importance in order to exploit the full potential of ceramic materials. The...

108
Authors: Hazman Seli, Ahmad Izani Md. Ismail, Endri Rachman, Zainal Arifin Ahmad

Abstract: Numerical model of friction welding between ceramic and metal rods are established to predict temperature rises during the initial phase of...

115
Authors: Hanabusa Takao, Ayumi Shiro, Tatsuya Okada

Abstract: Residual stresses of a copper bicrystal were measured by X-ray diffraction and synchrotron radiation. A copper bicrystal specimen with a...

125

Showing 11 to 20 of 23 Paper Titles