Dense ceramic samples BaCe0.85-xZrxEr0.15O3-α (0.0 ≤ x ≤ 0.4) were synthesized by heat-treating the precursor prepared via a micro-emulsion route. The obtained ceramic samples showed a single phase of orthorhombic perovskite. It was found that the ceramic powders of BaCe0.85 − xZrxEr0.15O3-α were relatively stable when x ≥ 0.2 after exposure in 94% N2 + 3% CO2 + 3% H2O atmosphere at 873.15 K for 20 h. The total conductivities of the ceramic samples decreased with increasing Zr content in the samples in wet hydrogen. Among the ceramic samples studied, BaCe0.65Zr0.2Er0.15O3-α displayed both a high chemical stability in 94% N2 + 3% CO2 + 3% H2O atmosphere and an acceptable conductivity at 573.15–1073.15 K. The results indicated that BaCe0.65Zr0.2Er0.15O3-α was almost pure ionic conductor at 773.15–1073.15 K in wet hydrogen atmosphere. The ionic conduction was contributed mainly by proton with transference numbers of 0.95–0.81 and partially by oxide ion with transference numbers of 0.02 to 0.08. In addition, BaCe0.65Zr0.2Er0.15O3-α was successfully applied to the ammonia synthesis at atmospheric pressure. The peak ammonia formation rate achieved 3.27 x 10− 9 mol/s.cm2 under a direct current of 1.0mA at 723.15K.

Ionic Conduction in BaCe0.85−xZrxEr0.15O3-α and its Application to Ammonia Synthesis at Atmospheric Pressure. J.Yin, X.Wang, J.Xu, H.Wang, F.Zhang, G.Ma: Solid State Ionics, 2011, 185[1], 6-10