Fatigue Crack Growth Resistance in Ni-Base Super Alloy


Article Preview

Rotating bending fatigue tests were carried out to investigate the influence of grain size on the resistance to crack growth of Ni-base super alloy, Inconel 718, using the materials with grain sizes of about 20, 50,100 and 200 たm, at room temperature. The larger grain size, the smaller crack growth rate, though the static strength was decreased with increase in grain size. The growth rate of a small crack was uniquely determined by the term ja na (Small crack growth law), where ja and a are the stress amplitude and the crack length, respectively, and n is a constant. The resistance to crack growth among materials was evaluated based on the law and showed a good correlation with tensile strength jB, meaning that fatigue life can be predicted by using only j B BB.



Key Engineering Materials (Volumes 348-349)

Edited by:

J. Alfaiate, M.H. Aliabadi, M. Guagliano and L. Susmel




K. Morino et al., "Fatigue Crack Growth Resistance in Ni-Base Super Alloy", Key Engineering Materials, Vols. 348-349, pp. 541-544, 2007

Online since:

September 2007




[1] N. Kawagoishi, Q. Chen and H. Nisitani: Fatigue Fract. Engng Mater Structt., Vol. 23(2000), p.209.

[2] H. Kimura, Y. Akiniwa, K. Tanaka, Y. Tahara and T. Ishikawa: JSME International Journal, Ser. A, Vol. 47(2004), p.331.

[3] D.D. Krueger, D.S. Antolovich and R.H.V. Stone: Metallurgical Transaction A, Vol. 18A(1987), p.1431.

[4] H. Nisitani: Mechanics of Fatigue, ASME AMD (Edited by Mura, T), Vol. 47(1981), p.151.

[5] H. Nisitani, N. Kawagoishi and M. Goto: Handbook of Fatigue Crack Propagation in Metallic Structures(Editted by Carpinteri, A) (1994).

Fetching data from Crossref.
This may take some time to load.