HA Active Coating on Titanium Prepared by Spark Plasma Sintering


Article Preview

Hydroxyapatite (HA) active coatings on Titanium were prepared using Spark Plasma Sintering (SPS). This study focused on the effects of the composition and thickness of coating on its bonding strength and the fracture appearance. The results showed that the Ti20wt%HA80wt% coating on Titanium could be well sintered, and bonding strength was improved from 12 MPa to 29 MPa and to 36 MPa along with the reduction of the coat thickness from 0.3mm to 0.2mm and to 0.1mm respectively. When the coating was treated by passivation, the bonding strength of interface increased largely to 48MPa and 64MPa respectively for HA coating and Ti20wt%HA80wt% coating on Titanium body, which the HA did not disassemble, and metallurgical combination between coating and metal was realized at 1180K.



Key Engineering Materials (Volumes 353-358)

Edited by:

Yu Zhou, Shan-Tung Tu and Xishan Xie




G. L. Zhang et al., "HA Active Coating on Titanium Prepared by Spark Plasma Sintering ", Key Engineering Materials, Vols. 353-358, pp. 1679-1682, 2007

Online since:

September 2007




[1] Kweh S.W.K., K.P. Cheang: Biomaterials Vol. 23 (2002), pp.381-387.

[2] C.L. CHU, J. ZHU, Z. YIN: Materials Science and Engineering A Vol. A316 (2001), pp.205-210.

[3] Kweh S.W.K., K.A. Khor, P. CHANG: Biomaterials Vol. 21 (2000), pp.1223-1234.

[4] X.B. ZHENG, M. HUANG, C. DING: Biomaterials Vol. 21 (2000), pp.841-849.

[5] M. Metiko Hukovi, E. Tkalec, A. Kwokal and J. Piljac: Surface and Coatings Technology Vol. 165 (2003), pp.40-50.

[6] O. Masazumi, K. Kensuke, I. Masahiko, I. Ryoichi and T. Osamu: Solid State Ionics Vol. 12 (2002), pp.47-52.

[7] Y.T. YU, X.D. ZHANG.: Biomaterials. (Tianjin University Publications, Tianjin 2000).

[8] G.Z. ZHANG, G. L ZHANG, J.X. ZHANG, et al.: Powder Metallurgy Technology Vol. 22 (2004), pp.16-18.

Fetching data from Crossref.
This may take some time to load.