Sheet Metal 2011

Volume 473

doi: 10.4028/

Paper Title Page

Authors: Mohamed Achouri, Guenael Germain, Phillippe dal Santo, Serge Boude, Jean Lou Lebrun, Delphine Saidane

Abstract: This work dealsa contribution to ductile damageof High-Strength Low-Alloy (HSLA) steel under low stress triaxiality. This work is based on...

Authors: M. Nebebe, Jan Bohlen, Dirk Steglich, Jörn Mosler

Abstract: This work is concerned with numerical analyses of the forming behavior of magnesium at elevated temperature. For that purpose, a...

Authors: Lothar W. Meyer, Shawky Abdel-Malek, Norman Herzig

Abstract: Beside tension tests and measuring of Lankford coefficients (r-values), compression tests on small cubes in the sheet plane over a wide...

Authors: Maria Doig, Karl Roll

Abstract: Due to increasing demands to reduce C02-emission and to augment occupant’s safety new modern materials are developed ongoing. Because of...

Authors: N. Grittner, M. Engelhardt, M. Hepke, Dirk Bormann, Bernd Arno Behrens, Friedrich Wilhelm Bach

Abstract: Due to its low density and good mechanical properties Magnesium holds a high potential for design applications. The investigations discussed...

Authors: Tobias Kleeh, Marion Merklein, Karl Roll

Abstract: In order to improve fuel efficiency, the use of lightweight materials in the automotive industry is continuously increasing. The AA6XXX and...

Authors: Zong Ru Yang, Daniel Scherer, Matthias Golle, Hartmut Hoffmann

Abstract: Shrinking is an incremental forming process and can be carried out using a driving machine, so called “Kraftformer”. It needs an upper and a...

Authors: Thi Hong Minh Nguyen, Joost R. Duflou, Jean Pierre Kruth

Abstract: This paper presents a complete model including method and result for tolerance verification of bent sheet metal parts. The method uses a...

Authors: Gianluca D'Urso, Michela Longo, Giancarlo Maccarini, Claudio Giardini

Abstract: Metal foams are two-phase compounds of a gas and a solid with several interesting physical and mechanical properties; in particular they...

Authors: Paul Wood, Muhammad Jawad Qarni, Andrzej Rosochowski

Abstract: This paper examines the effect of friction and back pressure on the formability of superplastically formed aluminium alloy AA7475 sheet at...


Showing 61 to 70 of 130 Paper Titles