Effects of Technological Parameters on the Surface Texture of Burnished Surfaces

Abstract:

Article Preview

In this study we analysed the process of diamond burnishing. We examined the effect of burnishing technological parameters on the surface roughness of the burnished surface, and on the improvement ratio of surface roughness. Parameters taking into consideration during examinations are burnishing speed, burnishing feed, and burnishing force. We determined a formula suitable for determination of the improvement ratio of surface roughness by the Factorial Experimental Design which is valid in the examined parameter range.

Info:

Periodical:

Edited by:

János Kundrák and Zsolt Maros

Pages:

403-408

Citation:

G. Varga "Effects of Technological Parameters on the Surface Texture of Burnished Surfaces", Key Engineering Materials, Vol. 581, pp. 403-408, 2014

Online since:

October 2013

Authors:

Export:

Price:

$38.00

[1] Kuric, I., New Methods and Trends in Product Development and Process Planning, Acad. J. of Manuf. Eng., Editura Politehnica, Vol. 9, Iss. 1/2011, pp.: 83-88. ISSN 1583-7904.

[2] Szabo, O., Optimisation of Technology and Quasi Honing, of Polygon Bores, Journal of Materials Processing Technology, 119 (1-3), (2001) pp.17-121.

DOI: https://doi.org/10.1016/s0924-0136(01)00886-x

[3] Košťál, P., Mudriková, A., Laboratory of Flexible Manufacturing System, Advanced Materials Research, Vol. 429 (2012), 31-36 ISSN pp.1022-6680.

DOI: https://doi.org/10.4028/www.scientific.net/amr.429.31

[4] Luca, L., Neagu-Ventzel, S., Marinescu, I., Effects of Working Parameters on Surface Finish in Ball-burnishing of Hardened Steels, Precis Eng 29 (2005) 253.

DOI: https://doi.org/10.1016/j.precisioneng.2004.02.002

[5] El-Axir, M.H., Othman, O.M., Abodiena, A.M., Improvements in Out-of-roundness and Microhardness of Inner Surfaces by Internal Ball Burnishing Process, J Mat Proc. Tech. (2008) 196.

DOI: https://doi.org/10.1016/j.jmatprotec.2007.05.028

[6] Szalay, T., Czampa, M., Markos, S., Farkas, B., Investigation of Machinability of Iron Based Metal Matrix Composite (MMC) Powder Metallurgy Parts. Melville: American Institute of Physics, pp.300-303 (ISBN: 978-0-7354-1085-5).

DOI: https://doi.org/10.1063/1.4751615

[7] Luo, H, Liu, J., Wang, L., Zhong, Q., Investigation of the Burnishing Force during the Burnishing Process with a Cylindrical Surfaced Tool, P I Mech Eng B J Eng Manuf 220 (2006) 893.

DOI: https://doi.org/10.1243/09544054b07604

[8] Kundrak, J., Mamalis, A.G., Gyani, K., et al., Surface Layer Microhardness Changes with High-speed Turning of Hardened Steels, I. J. of Adv. Manuf. Techn, Vol.: 53, Issue: 1-4, (2011) 105-112.

DOI: https://doi.org/10.1007/s00170-010-2840-y

[9] Kundrak, J., Alternative Machining Procedures of Hardened Steels, Manufacturing Technology, Vol. 11, No. 11, Dec. (2011) pp.32-39, ISSN-1213-2489.

[10] Madl, J., Surface Properties in Precise and Hard Machining, Manufacturing Technology, Vol. 12, No. 13, Dec. (2012) 158-166, ISSN-1213-2489.

[11] Beňo, J., Maňková, I., Vrabeľ, M., Kottfer, D., Roughness Measurement Methodology for Selection of Tool Inserts, Measurement, Vol. 46, Iss 1, January (2013), 582–592- ISSN 0263-2241.

DOI: https://doi.org/10.1016/j.measurement.2012.08.017

[12] Mikó, B., Beno, J., Manková, I., Experimental Verification of Cusp Heights when 3D Milling Rounded Surfaces, Acta Polytechnica Hungarica, Vol. 9., No. 6, (2012) 101-116 ISSN 1785-8860.

[13] Liska, K., Kodacsy, J., Liska, J., Investigation of the Microgeometry after Hard Turning and Diamond Burnishing, Adv. Materials Research, Vol. 472-475, (2012) 902-907, ISSN 1022-6680.

DOI: https://doi.org/10.4028/www.scientific.net/amr.472-475.902

[14] Ebeid S.J., El-Taweel T.A., Surface Improvement through Hybridization of Electrochemical Turning and Roller Burnishing based on the Taguchi Technique. Proc Inst Mech Eng B J Eng Manuf 219, (2005) 423.

DOI: https://doi.org/10.1243/095440505x32283

[15] Information on http: /www. digitalsurf. fr/en/guide3dparam. html (May 08, 2012).

Fetching data from Crossref.
This may take some time to load.