Impact of the Strain Rate during Tension Test on 46Cr1 Steel Temperature Change

Abstract:

Article Preview

The aim of this paper was to assess influence of the strain rate on the specimen temperature change during monotonic tensile test. Based on the assessment of this change under variable strain rate, it was determined the level of internal specimen energy change. The assessment to extent to which the adiabatic testing conditions were maintained was made based on this results.

Info:

Periodical:

Edited by:

Jaroslaw Galkiewicz

Pages:

133-140

Citation:

A. Lipski "Impact of the Strain Rate during Tension Test on 46Cr1 Steel Temperature Change", Key Engineering Materials, Vol. 598, pp. 133-140, 2014

Online since:

January 2014

Authors:

Export:

Price:

$38.00

* - Corresponding Author

[1] Cavaliere P., De Santis A., Panella F., Squillace A.: Thermoelasticity and CCD analysis of crack propagation in AA6082 friction stir welded joints. International Journal of Fatigue, 31 (2009), p.385–392.

DOI: https://doi.org/10.1016/j.ijfatigue.2008.07.016

[2] Diaz F.A., Yates J.R., Patterson E.A.: Some improvements in the analysis of fatigue cracks using thermoelasticity. International Journal of Fatigue, 26 (2004), p.365–376.

DOI: https://doi.org/10.1016/j.ijfatigue.2003.08.018

[3] Dulieu-Barton J.M., Fulton M.C., Stanley P.: The analysis of thermoelastic isopachic data from crack tip stress fields. Fatigue Fract. Engng Mater. Struct., 2000, 23, p.301–313.

DOI: https://doi.org/10.1046/j.1460-2695.2000.00289.x

[4] Guduru P.R., Zehnder A.T., Rosakis A.J., Ravichandran G.: Dynamic full field measurements of crack tip temperatures. Engineering Fracture Mechanics, 68 (2001), pp.1535-1556.

DOI: https://doi.org/10.1016/s0013-7944(01)00045-5

[5] Haj-Ali R., Wei B. -S., Johnson S., El-Hajjar R.: Thermoelastic and infrared-thermography methods for surface strains in cracked orthotropic composite materials. Engineering Fracture Mechanics, 75 (2008), pp.58-75.

DOI: https://doi.org/10.1016/j.engfracmech.2007.02.014

[6] Harwood N., Cummings W.M.: Thermoelastic Stress Analysis. IOP Publishing Ltd., (1991).

[7] Jones R., Krishnapillai M., Cairns K., Matthews N.: Application of infrared thermography to study crack growth and fatigue life extension procedures. Fatigue Fract. Engng Mater. Struct., 2010, 33, p.871–884.

DOI: https://doi.org/10.1111/j.1460-2695.2010.01505.x

[8] Jones R., Pitt S.: An experimental evaluation of crack face energy dissipation. International Journal of Fatigue, 28 (2006), p.1716–1724.

DOI: https://doi.org/10.1016/j.ijfatigue.2006.01.009

[9] Kaleta J.: The experimental foundations of energetical fatigue hypothesis folmulation. Wrocław University of Technology, Wrocław, 1998 (in Polish).

[10] Katarzyński S., Kocańda S., Zakrzewski M.: Tests of mechanical properties of metals. WNT, Warszawa 1967 (in Polish).

[11] Kobayashi A.S. (ed. ): Handbook on Experimental Mechanics. Second Revised Edition, Society for Experimental Mechanics, Bethel, USA, (1993).

[12] Kuo T.Y., Lin H.S., Lee H.T.: The relationship between of fracture behaviors and thermomechanical effects of alloy AA2024 of T3 and T81 temper designations using the center crack tensile test. Materials Science and Engineering, A, 394 (2005).

DOI: https://doi.org/10.1016/j.msea.2004.10.014

[13] Lin S.T., Feng Z., Rowlands R.E.: Thermoelastic determination of stress intensity factors in orthotropic composites using the J-Integral. Engineering Fracture Mechanics, 1997, Vol. 56, No. 4, pp.579-592.

DOI: https://doi.org/10.1016/s0013-7944(96)00062-8

[14] Lipski A.: The use of passive infrared thermography for tests of materials and riveted joints used in aviation industry - selected problems. Part II of the collection of monographs (edited by Szala J. ): Experimental methods in studies of materials and riveted joints used in aviation industry - selected problems, Institute For Sustainable Technologies - National Research Institute in Radom, Bydgoszcz-Radom, 2010 (in Polish).

[15] Lipski A., Boroński D.: Use of thermography for the analysis of strength properties of mini-specimens. Materials Science Forum, Vol. 726 (2012), pp.156-161.

DOI: https://doi.org/10.4028/www.scientific.net/msf.726.156

[16] Lipski A., Skibicki D.: Variations of the specimen temperature depending on the pattern of the multiaxial load - preliminary research. Materials Science Forum, Vol. 726 (2012), pp.162-168.

DOI: https://doi.org/10.4028/www.scientific.net/msf.726.162

[17] Litwinko R., Oliferuk W.: Yield point determination based on thermomechanical behaviour of polycrystalline material under uniaxial loading. Acta Mechanica et Automatica, Vol. 3, No. 4 (2009), pp.49-51.

[18] Oda I., Willett A., Yamamoto M., Matsumoto T., Sosogi Y.: Non-contact evaluation of stresses and deformation behaviour in pre-cracked dissimilar welded plates. Engineering Fracture Mechanics, 71 (2004), p.1453–1475.

DOI: https://doi.org/10.1016/s0013-7944(03)00160-7

[19] Tomlinson R.A., Marsavina L.: Thermoelastic investigations for fatigue life assessment. Experimental Mechanics, 2004, 44 (5), pp.487-494.

DOI: https://doi.org/10.1007/bf02427960

[20] Tomlinson R.A., Nurse A.D., Patterson E.A.: On determining stress intensity factors for mixed mode cracks from thermoelastic data. Fatigue & Fracture of Engineering Materials & Structures, 1997, Vol. 20, No. 2, p.217–226.

DOI: https://doi.org/10.1111/j.1460-2695.1997.tb00279.x

[21] Tomlinson R.A., Patterson E.A.: Examination of crack tip plasticity using Thermoelastic Stress Analysis. In: Proulx T. (ed. ): Thermomechanics and Infra-Red Imaging, Volume 7, Conference Proceedings of the Society for Experimental Mechanics, pp.123-129.

DOI: https://doi.org/10.1007/978-1-4614-0207-7_16

Fetching data from Crossref.
This may take some time to load.