Effects of Acid on the Performance of Polishing Process


Article Preview

The serious quality problem in the magnetic substrate during polishing process by using conventional lapping machine had generate the idea to develop a doubled-sided lapping machine of polishing stone manufactured of an abrasive and resin. After certain parameter of polishing process, the polishing stone starts to clog because of debris agglomeration from the polishing substrate, thus lead to the scratches on the magnetic substrate which will affect its performance. Three difference type of acid were used as to dissolve the debris agglomeration in the polishing stone. The influence of oxalic, phosphoric and citric acid at three different times were examined. It was found that oxalic acid is the best chelating agent in dissolving the debris in the polishing stone.



Edited by:

M.M. Al Bakri Abdullah, Z. Yahya and M.A.A. Mohd Salleh




N. S. Hasni et al., "Effects of Acid on the Performance of Polishing Process", Key Engineering Materials, Vol. 700, pp. 50-59, 2016

Online since:

July 2016




* - Corresponding Author

[1] H. Tomita and Y. Eda: A study of the ultra precision grinding process on a magnetic disk substrate-development of new bonding materials for fixed abrasives of grinding stone. Wear Vol. 74-80(1996), p.195.

DOI: https://doi.org/10.1016/0043-1648(95)06792-2

[2] H. Lei and J. Lou: CMP of hard disk substrate using a colloidal SiO2 slurry: preliminary experimental investigation. Wear Vol. 461-470 2004), p.257.

DOI: https://doi.org/10.1016/j.wear.2004.01.017

[3] T. Mang, in: Lubricants and Lubrication, edited by T. Mang and W. Dresel, Publications/Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim ( 2007).

[4] W. B. Rowe: Principles of modern grinding technology, Publications/William Andrew Publishing, UK (2009).

[5] S.C. Lin, H.C. Huang and H. Hocheng: Effects of slurry components on the surface characteristics when chemical mechanical polishing NiP/Al substrate. Thin Solid Films Vol. 400-406 (2005), p.483.

DOI: https://doi.org/10.1016/j.tsf.2004.12.046

[6] J. Xin, W. Cai and J.A. Tichy: A fundamental model proposed for material removal in chemical-mechanical polishing. Wear Vol 837-844 (2010), p.268.

DOI: https://doi.org/10.1016/j.wear.2009.12.005

[7] Y. Sato, T., Mitsuhashi, K., Tomita, Y., and Sasaki, U.S. Patent 5060, 424. (1991).

[8] V.B. Kaufman and S. Wang. U.S. Patent 5, 783, 489. (1998).

[9] A.D. Feller and K.C. Cadien. U.S. Patent 5, 700, 383 (1997).

[10] W.T. Tsai and H.S. Kuo: Effects of alumina and hydrogen peroxide on the chemical-mechanical polishing of aluminum in phosphoric acid baseslurry. Materials Chemistry and Physics Vol. 53-61 (2001), p.69.

DOI: https://doi.org/10.1016/s0254-0584(00)00299-6

[11] P. Rao and D. Prabhu: Coriandrum sativum L. -A novl green inhibitor for the corrosion inhibiton of aluminum in 1. 0 M phosphoric acid solution. Journal of Environmental Chemical Engineering Vol. 676-683 (2013), p.1.

DOI: https://doi.org/10.1016/j.jece.2013.07.004

[12] M.D. Rostoker and N.F. Pasch: U.S. Patent 5, 389, 194 (1995).

[13] Q. Wei, Y. Zhou, C. Xu and Y. Liu: Affects of citric acid as a chelating agent on the performance of a heavy oil hydrotreatment catalyst. ACS Symposium Series Vol. 3-13 (2011), p.1088.

DOI: https://doi.org/10.1021/bk-2011-1088.ch001

[14] Z. Mohammadi, S. Shalawi and H. Jafarzadeh: Ethylenediaminetetraacetic acid in endodontics. European Journal of Dentistry Vol 7 (2013), pp.135-42.

Fetching data from Crossref.
This may take some time to load.