Room Temperature Compression Behavior of Mixtures of Carbonyl Iron Powder and HDPE

Abstract:

Article Preview

In present research work, metal injection molded cylindrical samples containing the mixture of carbonyl iron powder and high-density polyethylene (HDPE) were compressed at various strain rates. Three mixtures of carbonyl iron powder and HDPE were prepared to contain 80 %( Material A), 86 %( Material B) and 92 %( Material C) metal powder by weight. Compression tests were performed on the cylindrical samples at different crosshead velocities of Universal Testing Machine varying from 0.6-25 mm/min. True stress-true strain behavior of these samples under uniaxial compression test was studied. Based on these curves, polynomial equations were formulated to describe the plastic deformation behavior of the various mixtures at various cross head velocities. The Material C samples showed higher strength as compared to samples from the other two materials. However, Material A showed superior deformation behavior.

Info:

Periodical:

Edited by:

Marina Polyakova

Pages:

25-30

Citation:

B. D. Deorukhkar et al., "Room Temperature Compression Behavior of Mixtures of Carbonyl Iron Powder and HDPE", Key Engineering Materials, Vol. 779, pp. 25-30, 2018

Online since:

September 2018

Export:

Price:

$38.00

* - Corresponding Author

[1] K. K. Rane and P. P. Date, Rheological Investigation of MIM Feedstocks for Reducing Frictional Effects during Injection Moulding,, Adv. Mater. Res., vol. 966–967, p.196–205, (2014).

DOI: https://doi.org/10.4028/www.scientific.net/amr.966-967.196

[2] J. F. Horta, F. J. Simões, and A. Mateus, Study of Wood-Plastic Composites with Reused High Density Polyethylene and Wood Sawdust,, Procedia Manuf., vol. 12, no. December 2016, p.221–229, (2017).

DOI: https://doi.org/10.1016/j.promfg.2017.08.026

[3] R. Huang, X. Xu, S. Lee, Y. Zhang, B.-J. Kim, and Q. Wu, High Density Polyethylene Composites Reinforced with Hybrid Inorganic Fillers: Morphology, Mechanical and Thermal Expansion Performance,, Materials (Basel)., vol. 6, no. 9, p.4122–4138, (2013).

DOI: https://doi.org/10.3390/ma6094122

[4] K.-S. Rahman, M. Islam, M. Rahman, M. Hannan, R. Dungani, and H. Khalil, Flat-pressed wood plastic composites from sawdust and recycled polyethylene terephthalate (PET): physical and mechanical properties,, Springerplus, vol. 2, no. 1, p.629, (2013).

DOI: https://doi.org/10.1186/2193-1801-2-629

[5] V. A. Zhorin and M. R. Kiselev, Thermal effects in mixtures of aluminum with polyvinyl chloride after plastic deformation under high pressure,, Prot. Met. Phys. Chem. Surfaces, vol. 48, no. 5, p.508–514, (2012).

DOI: https://doi.org/10.1134/s2070205112050164

Fetching data from Crossref.
This may take some time to load.