The Physical, Mechanical and Thermal Analysis on Methoxy Functional Silicone Intermediate Resin Blending with Acrylic Polyol Resin


Article Preview

Silicone modified acrylic polymer dispersion was prepared by blending methoxy functional silicone intermediate resin with acrylic polyol resin in different ratios. The physical, mechanical and thermal properties were investigated. The physical property of the blend has been carried out by using Kruss G40 contact angle measuring system, mechanical property of the blend evaluated by using impact resistance tester and adhesion tester (Cross Hatch- Cutter) and thermal analysis has been carried out by using Metler Toledo thermal analysis system DSC821. It is found that the incorporation of 50% silicone resin with 50% acrylic resin gives good adhesion on metal substrate (mild steel substrate) and optimal cross-linking is achieved.



Edited by:

A.K. Arof and S.A. Hashim Ali




B. Vengadaesvaran et al., "The Physical, Mechanical and Thermal Analysis on Methoxy Functional Silicone Intermediate Resin Blending with Acrylic Polyol Resin ", Materials Science Forum, Vol. 517, pp. 111-116, 2006

Online since:

June 2006




[1] Mukherjee, A.K., Pande L.M., Sharma S.D., Sing I.D., and Singhaney B.S., (1971), Jur. Colour Soc., April/June, p.14.

[2] Padubidri S., (1990), Paint India, Vol. 40, No. 7, p.33.

[3] Mathivanan L. and Arof A.K., (2000), The effect of zirconium oxide and quartz pigments on the heat and corrosion resistance properties of the silicone based coating, Pigment and Resin Tech., Vol. 29, No. 1, p.10.


[4] Chan H. (1974), Technology of Paints, Varnishes and Lacquers, E. Kreiger publishing Co., Huntingdon, NY.

[5] Clive H. Hare, (1995), Anatomy of Paints, Vol. 79, p.79.

[6] Masakazu Hirose, Jianhui, Zhou, Katsutoshi Nagai, (2001), The structure and properties of acrylic-polyurethane hybrid emulsion, Prog. Org. Coat. Vol. 43, pp.27-34.


[7] Johnson B. W., Melntyre R., (1996), Analysis of test methods for UV durability predictions of polymer coating, Prog. Org. Coat. Vol. 27, pp.95-106.

[8] Micheal Osterhold, Kornelia Armbruster, (1998), Correlation between surface tension and physical paint properties, Prog. Org. Coat. Vol. 33, pp.197-201.


[9] Sarkar P. C., and Shrivastava A. K., (2000), FT-IR spectroscopic studies on degradation of lac resin- part I: thermal degradation, Pigment and Resin Tech. Vol. 29, No. 1, pp.23-28.


[10] Pawel S. J., (1995), Evaluating coating systems for long-term immersion service, Coating and Linings, MP/ October, pp.37-42.

[11] Shelby F. Thames, Narendrs Patel, (1989), Effect of silicone incorporation on the performance of epoxy derived powder coating, Journal of Coating technology, Vol. 61, pp.53-59.

[12] Peter Walker, (1980), Organo silanes as adhesion promoters for organic coatings, J. Coat. Tech. Vol. 52, pp.49-61.

[13] Youssef E. A. M., (1996), Heat-resistance anticorrosive paints based on Egyptian manganese ore, Anticorrosion Methods and Materials, Vol. 43, pp.17-21.


[14] Selvaraj M., (1997) Stainless steel powder as a protective and decorative pigment for steel structure in organic coating industry, Anticorrosion Methods and Materials, Vol. 44, No. 1, , pp.13-19.


[15] Yasuda H., Yu Q. S., Chen M., (2001), Interfacial factors in corrosion protections: an EIS study of model system, Prog. Org. Coat. Vol. 41, p.273279.

[16] Ramamurthy A. C., Lorenzen W. I., Bless S. J., (1994), Stone impact damage to automotive paint finishes: an introduction to impact physics and impact induced corrosion, Prog. Org. Coat. Vol. 25, pp.43-71.


[17] Frings S., Meinema H.A., van Nostrum C.F., van der Linde R., (1998), Organic-inorganic hybrid coating for coil coating application based on polyester and tetraethoxysilane, Prog. Org. Coat. Vol. 33. pp.126-130.


[18] Frey Th, Grobe-Brinkhaus K. H., Rockrath U., (1996), Cure monitoring of thermoset coatings, Prog. Org. Coat. Vol. 27, pp.59-66.


[19] Carsten wuertz, Alexander Bismarck, Jurgen Springer. Rainer Koniger, (1999), Electro kinetic and mechanical characterization of uv induced crosslinked acrylic co-polymers, Prog. Org. Coat. Vol. 37, pp.117-129.


[20] Danuta Kotnarowska, (1999), Influence of ultraviolet radiation and aggressive media on epoxy coating degradation, Prog. Org. Coat. Vol. 37, pp.149-159.


[21] Mark B. Roller, (1982), The glass transition: What's the point?, Journal of coating Technology, Vol. 54, pp.33-39.

[22] Varadarajan K., (1983), Review of dielectric and dynamic mechanical relaxation techniques for the characterizations of organic coatings, Journal of coating Technology, Vol. 55, pp.95-104.

[23] Mallegol J., Gonon L., Commereuc S., Verney V., (2001), Thermal (DSC) and chemical (iodometric titration) methods for peroxides measurement in order to monitor the drying extent of alkyd resins, Prog. Org. Coat. Vol. 41, pp.171-176.


[24] Abdul Kader M., Bhowmick A. K., T. Inoue, T. Chiba, (2002), Morphology, mechanical and thermal behavior of acrylate rubber/fluorocarbon elastomers/polyacrylate blends, Jour. Mat. Sci. Vol. 37, pp.1503-1513.

[25] Timothy F. Scott, Wayne D. Vcook, John S. Forsythe, (2002), Photo-DSC cure kinetics of vinyl ester resin. I. Influence of temperature, Jour. Polymer, Vol. 43, pp.5839-5845.