Eco-Materials Processing and Design XI

Volume 658

doi: 10.4028/www.scientific.net/MSF.658

Paper Title Page

Authors: Masaki Narisawa, Yayoi Satoh, Ryuichi Sumimoto, Takashi Kamegawa, Hiromi Yamashita

Abstract: Melt spinnable silicone resin with a low carbon content was spun to fiber form with an averaged diameter of 16.8 m. When the resin fiber...

400
Authors: Seung Ho Kim, Sung Hun Cho, Simo Pekka Hannula, Soo Wohn Lee

Abstract: Solid lubricants were suited for the applications of high temperature parts. Recently, researches for self-lubricating ceramic matrix...

404
Authors: Hui Xie, Lei Jia, Si Ming Wang, Ji Ling Zhu, Zhen Lin Lu

Abstract: Cu-Mo-Si alloys with different Cu contents were prepared by self-propagation high-temperature synthesis (SHS). The microstructure and the...

408
Authors: Zhang Fu Yang, Hao Wang, Xin Min Min, Wei Min Wang, Zheng Yi Fu

Abstract: Ca-α-sialons with low oxygen content were fabricated at 1800°C by hot pressing. The phase and microstructure were characterized by XRD and...

412
Authors: Hyun Hwi Lee, Seung Ho Kim, Bhupendra Joshi, Sung Hun Cho, Soo Wohn Lee

Abstract: The ceramic channel is very important in SRL hot dipping system. High strength and fracture toughness of ceramic channel materials can...

416
Authors: Keita Taniya, Akiko Izumi, Yuichi Ichihashi, Satoru Nishiyama

Abstract: Influence of preparation method on the catalytic activity of zirconium supported on MCM-41 has been investigated for...

420
Authors: Gobinda Gyawali, Sung Hun Cho, Dong Jin Woo, Soo Wohn Lee

Abstract: Ni-SiC nano composite coatings were fabricated using electrodeposition technique with the aid of ultrasound. The properties of the nano...

424
Authors: Bhupendra Joshi, Hyun Hwi Lee, Seung Ho Kim, Zheng Yi Fu, Koichi Niihara, Soo Wohn Lee

Abstract: The addition of h- BN to a polycrystalline Si3N4 was to increase the fracture toughness and other mechanical properties such as flexural...

428
Authors: Yuan Yuan Qiao, De Ning Zou, Jiao Li, Ying Han

Abstract: The various temperature solution experiments were carried out in this paper, which for 2205 duplex stainless steel joints welded by manual...

432
Authors: Yu Hua Pang, Yang Lei Hu, Qi Sun, Chang Rui Liu, Hai Feng Yu, Bin Lu, Mei Ming Zhang

Abstract: Material rolled in heavy plate mills and roughing stands often bends upwards or downwards. This phenomenon can lead to poor shape, profile...

436

Showing 101 to 110 of 129 Paper Titles