Residual Stresses VIII

Volume 681

doi: 10.4028/www.scientific.net/MSF.681

Paper Title Page

Authors: H. Michaud, Jean Michel Sprauel, Chedly Braham

Abstract: ASCOMETAL produces alloy steels used for spring (leaf or coil), where the weak fatigue points are on the surface which is reinforced by...

303
Authors: Emmanuel Lacoste, Sylvain Fréour, Frédéric Jacquemin

Abstract: This paper deals with the cure of an in-plane isotropic carbon-polymer tooling material, with a complex microstructure [1]. The Mori-Tanaka...

309
Authors: Abdelilah Benmarouane, Yeting Shi, Bastien Mireux, Thomas Buslaps, Alain Lodini

Abstract: The use of the implants has become current since 1930. With the improvement of technology, titanium alloy coated with nano-hydroxyapatite...

315
Authors: Vladimir Kostov, Jens Gibmeier, Alexander Wanner

Abstract: The effects of laser surface hardening of steel samples on the microstructure and residual stresses were determined for single as well as...

321
Authors: Sawsen Youssef, O. Calonne, Eric Feulvarch, P. Gilles, Hédi Hamdi

Abstract: Grinding cup wheel is often used in the case of hand grinding which allows an important material removal rate but with secondary concern of...

327
Authors: Wei Li, Philip J. Withers, Michael Preuss, Judith Shackleton, Paul Andrews

Abstract: This paper investigates the variation of residual stress with depth and radial location in a nickel base superalloy, RR1000, introduced by...

332
Authors: Alexander Grüning, Markus Lebsanft, Berthold Scholtes

Abstract: Residual stresses play a key role in thermo-mechanically coupled forming processes for industrial mass production. They are an unavoidable...

340
Authors: Yoshihisa Sakaida, Shohei Yamashita, Michiya Manzanka

Abstract: The hollow circular cylinder specimen of Cr-Mo steel with 0.20 mass% C was carburized in carrier gas and quenched in oil bath. After...

346
Authors: Bojan Podgornik, Vojteh Leskovšek, Miha Kovačič, Joze Vižintin

Abstract: Plasma nitriding is a thermo-chemical process of high importance for engineering components, which through generation of near-surface...

352
Authors: S. Mohsen Sadrossadat, Ru Lin Peng, Sten Johansson

Abstract: Residuals stresses can be present in almost every industrial component. Manufacturing processes such as casting, welding, and heat treatment...

358

Showing 51 to 60 of 88 Paper Titles