High-Temperature Oxidation and Corrosion 2010

Volume 696

doi: 10.4028/www.scientific.net/MSF.696

Paper Title Page

Authors: Jerzy Jedlinski, Jean Luc Grosseau-Poussard, Marek Nocuń, G. Smoła, Kazimierz Kowalski, J. Dąbek, A. Rakowska, G. Bonnet

Abstract: The early stages of the scale growth process were studied of two FeCrAl alloys: one synthetic (Fe23Cr5Al) and one commercial (Kanthal APM...

70
Authors: Michael Auinger, Sergiy Borodin, Srinivasan Swaminathan, Michael Rohwerder

Abstract: The grain boundary oxidation mechanism in hot rolled chromium – manganese steels during heat exposure at 700 °C was mathematically modeled....

76
Authors: Georgina Zimbitas, Willem G. Sloof

Abstract: A numerical model is presented to simulate the diffusional transport of oxygen and that of an alloying element, within a 1-D binary Ni...

82
Authors: Shohei Nakakubo, Mikako Takeda, Takashi Onishi

Abstract: The boundary constants between internal and external oxidation of Si or Cr containing steels (Fe-Si alloys or Fe-Cr alloys) at 850°C were...

88
Authors: Tadaaki Amano

Abstract: Scale surface and scale/alloy interface for alumina-forming (Fe-20Cr-4Al) alloys with noble metal (palladium, platinum) and yttrium were...

94
Authors: Hiroyuki Nakata, Akira Yamauchi, Shigeji Taniguchi, Ii Ryoung Sohn, Jin Won Choi, Kazuya Kurokawa

Abstract: Low carbon steels containing Si of 0.1 and 1.0 mass%, and 99.5 mass% pure Fe were oxidized in laboratory air and in a...

101
Authors: T.K. Rout, Johnson Go, Ani V. Gaikwad, Stefan Melzer

Abstract: Thermal barrier coating (TBC) is a need for automotive components to avoid high temperature oxidation during hot forming. The formation of...

107
Authors: Isao Saeki, Eiichiro Harada, Kengo Tsunekawa, Koji Matsuoka, Yui Naramitate, Yusuke Sugiyama, Tadao Sato

Abstract: Solutions containing cerium and aluminum ions were sprayed on a low-carbon steel, and high-temperature oxidation of the coated steels was...

114
Authors: Pascale Sotto Vangeli, Bo Ivarsson

Abstract: Construction materials are exposed to aggressive high temperature environments and it is important for materials selection to identify the...

120
Authors: Takumi Nishimoto, Kazuhiko Honda, Yasumitsu Kondo, Kenichi Uemura

Abstract: The oxidation behavior of Fe–Si alloys at 1073K in air was investigated. The oxidation kinetics described by the parabolic rate law of...

126

Showing 11 to 20 of 69 Paper Titles