Developing New Powder Wire for Surfacing Details which Works in the Wear Resistance Conditions

Abstract:

Article Preview

The paper presents the influence of chemical compositions and structure of the deposited metal on its hardness and wear resistance in abrasive-shock conditions. Metal Was deposited by the arc powder wire automatic welding. The studies have shown that increasing nikel contain to 0.65% in the surfaced steel and cobalt additive while reducing carbon contain to 0.17-0.23%, provides martensite and former austenite grain size disintegration. In consequence of multivariate correlation analysis, it was determined dependence to the hardness of the deposited layer and the wear resistance of the mass fraction of the elements included in the flux-cored wires of the system Fe-C-Si-Mn-Cr-Mo-Ni-V-Co. Obtained dependences could be used in predicting hardness and wear resistance of the deposited metal while changing welding metal chemical composition.

Info:

Periodical:

Edited by:

Dr. Dmitry A. Chinakhov

Pages:

126-133

Citation:

A.I. Gusev et al., "Developing New Powder Wire for Surfacing Details which Works in the Wear Resistance Conditions", Materials Science Forum, Vol. 927, pp. 126-133, 2018

Online since:

July 2018

Export:

Price:

$38.00

[1] Kirchgaßner M, Badisch E, Franek F. Behaviour of iron-based hardfacing alloys under abrasion and impact. 2008 Wear Journal. 265 P. 772–779.

DOI: https://doi.org/10.1016/j.wear.2008.01.004

[2] Azzoni M. Directions and developments in the types of hard phases to be applied in abrase deposits against abrasion. 2009 Weld International. 23 P. 706–716.

DOI: https://doi.org/10.1080/09507110902843248

[3] Klimpel A, Dobrzanski LA, Janicki D, Lisiecki A. Abrasion resistance of GMA metal cored wires surfaced deposits. 2005 Materials Processing Technology 164 – 165 P. 1056–1061.

DOI: https://doi.org/10.1016/j.jmatprotec.2005.02.242

[4] Wang Q, Li X. Effects of Nb, V, and W on microstructure and abrasion resistance of Fe–Cr–C hardfacing alloys. 2010 Welding. 89 P. 133–139.

[5] Metlitskii V.A. Flux-cored wires for arc welding and surfacing of cast iron. 2008 Welding International. 22 P. 796-800.

DOI: https://doi.org/10.1080/09507110802593646

[6] Kejžar R &  Grum J. Hardfacing of Wear-Resistant Deposits by MAG Welding with a Flux-Cored Wire Having Graphite in Its Filling 2005 Welding International 20 P. 961-976.

DOI: https://doi.org/10.1081/amp-200060424

[7] Li R, He D, Zhou Z, Wang Z & Song X. Wear and high temperature oxidation behavior of wire arc sprayed iron based coatings. 2014 Surface Engineering 30 – P. 784-790.

DOI: https://doi.org/10.1179/1743294414y.0000000331

[8] Ma H, Chen X, Li J, Chang C, Wang G, Li H, Wang X & Li R. Fe-based amorphous coating with high corrosion and wear resistance. 2016 Surface Engineering 46 P. 1-7.

DOI: https://doi.org/10.1080/02670844.2016.1176718

[9] Filippov M, Shumyakov V, Balin S, Zhilin A, Lehchilo V, Rimer G. Structure and wear resistance of deposited alloys based on metastable chromium–carbon austenite. 2015 Welding International 29 P. 819-822.

DOI: https://doi.org/10.1080/09507116.2014.986891

[10] Liu D, Liu R & Wei Y. Influence of tungsten on microstructure and wear resistance of iron base hardfacing alloy. 2013 Materials Science and Technology 30 P. 316-322.

DOI: https://doi.org/10.1179/1743284713y.0000000359

[11] Lim S,Gupta M, Hog Y, Seow K. Wear resistant WC–Co composite hard coatings. 1997 Surface Engineering 13 P. 247-250.

DOI: https://doi.org/10.1179/sur.1997.13.3.247

[12] Zhuk Yu. Super-Hard Wear-Resistant Coating Systems. 1999 Materials Technology 14 P. 126-129.

DOI: https://doi.org/10.1080/10667857.1999.11752827

[13] Hardell J, Yousfi A, Lund M, Pelcastre L, Prakash B. Abrasive wear behaviour of hardened high strength boron steel. 2014 Tribology - Materials, Surfaces & Interfaces 8 P. 90-97.

DOI: https://doi.org/10.1179/1751584x14y.0000000068

[14] Deng X, Fu T, Wang Z, Misra R, Wang G. Epsilon carbide precipitation and wear behaviour of low alloy wear resistant steels. 2016 Materials Science and Technology 32 P. 320-327.

DOI: https://doi.org/10.1080/02670836.2015.1137410

[15] B.E. Paton, Technology of electro-fusion welding steels and alloys, М.: Metallurgy, (1974).

[16] Gusev A.I., Osetkocskiy I.V. Study the properties of flux cored wire surfaced metal system C-Mn-Si-Cr-V-Mo-Со. 2016 Progressive technologies and economics in engineering: Collected works of VII AllRussia practical-science conference for student and educating youth in two volumes 1 P. 91-94.

[17] Gusev A, Kibko N, Kozyrev N, Popova M, Osetkovskiy I.A study on the properties of the deposited metal by flux cored wires 40GMFR and 40H3G2MF. 2016 IOP Conf. Series: Materials Science and Engineering 150 pp.1-9|.

DOI: https://doi.org/10.1088/1757-899x/150/1/012033

[18] Gusev A, Kibko N, Popova M, Kozyrev N, Osetkovskiy I. Structure and properties of deposited layers, surfaced by using powder wires 40GMFR and 40H3G2MF. 2016 Bulletin of mining-metallurgy section in Russian Academy of Natural Science. Metallurgy department: Collection of Scientific works 36 P. 174-181.

[19] Venzel E.S. Probability calculus. М.: High School, 1999. – 576 p.

[20] Venzel E.S. Ovcharov L.A. Probability calculus and it's engineering edition М.: Publishing center «Academy », 2003. – 464 p.

[21] Gruman V.E. . Probability calculus and mathematic statistics М.:High School., 2003. – 479 p.