Microcrystalline Cellulose from Lignocellulosic Material Activated by Steam Explosion Treatment and Mathematical Modeling of the Processes Accompanying its Preparation


Article Preview

In this paper we propose a mathematical model and an algorithm for calculating the processes accompanying the hydrolysis of a lignocellulosic material activated by steam explosion treatment, the purpose of which is to obtain microcrystalline cellulose (MCC). The calculation of the process is implemented in MathCad and CurveExpert software environments. The obtained modeling results will allow to control the technological processes of continuous delignification and hydrolysis of lignocellulosic material activated by steam explosion treatment and also to automate them.



Edited by:

Dr. Denis Solovev




D.B. Prosvirnikov et al., "Microcrystalline Cellulose from Lignocellulosic Material Activated by Steam Explosion Treatment and Mathematical Modeling of the Processes Accompanying its Preparation", Materials Science Forum, Vol. 945, pp. 911-918, 2019

Online since:

February 2019




* - Corresponding Author

[1] Prosvirnikov D.B., Baigildeeva E.I., Sadrtdinov A.R. and Fomin A.A., Modelling heat and mass transfer processes in capillary-porous materials at their grinding by pressure release. Proceedings of 2017 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2017, art. no. 8076443. 2017..

[2] Sadrtdinov A.R. et al., IOP Conf. Ser.: Mater. Sci. Eng. 124 (2016) 012092..

[3] Tuntsev D.V., et al., The mathematical model of fast pyrolysis of wood waste. Proceedings of 2015 International Conference on Mechanical Engineering, Automation and Control Systems, MEACS 2015. (2015) 7414929..

[4] Sychevskii, V.A., Drying of colloidal capillary-porous materials. International Journal of Heat and Mass Transfer. 85 (2015) 740-749.

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2015.02.025

[5] Prosvirnikov D.B. et al,. IOP Conf. Ser.: Mater. Sci. Eng. 221 (2017) 012010..

[6] Yang, L., Rong, H. & He, Y. J., of Materi Eng and Perform. 23 (2014) 429-438..

[7] Prosvirnikov D.B. et al., Modeling of delignification process of activated wood and equipment for its implementation. IOP Conf. Ser.: Mater. Sci. Eng. 221 (1) (2017) 012009..

[8] Gujjala, L. K., Bandyopadhyay, T. K., & Banerjee, R., Kinetic modelling of laccase mediated delignification of Lantana camara. Bioresource technology. 212 (2016) 47-54.

DOI: https://doi.org/10.1016/j.biortech.2016.04.006

[9] Dagnino, E. P. et al., Optimization of the soda-ethanol delignification stage for a rice husk biorefinery. Industrial Crops and Products. 97 (2017) 156-165.

DOI: https://doi.org/10.1016/j.indcrop.2016.12.016

[10] Safin, R., Barcik, S., Tuntsev, D., Safin, R., & Hismatov, R. A., mathematical model of thermal decomposition of wood in conditions of fluidized bed. Acta Facultatis Xylologiae Zvolen res Publica Slovaca. 58 (2) (2016) 141-148..

[11] Dutta, S. K., Halder, G., & Mandal, M. K., Modeling and optimization of bi-directional delignification of rice straw for production of bio-fuel feedstock using central composite design approach. Energy. 71 (2014) 579-587.

DOI: https://doi.org/10.1016/j.energy.2014.04.108

[12] Fomin A.A., Limiting product surface and its use in profile milling design operations. Solid State Phenomena. 265 (2017) 672-678..

[13] Timerbaev N.F. et al., Application of software solutions for modeling and analysis of parameters of belt drive in engineering. IOP Conf. Ser.: Earth Environ. Sci. 87 (8) (2017) 082047..

[14] Qing, Qing, et al., A combined sodium phosphate and sodium sulfide pretreatment for enhanced enzymatic digestibility and delignification of corn stover. Bioresource Technology. 218 (2016) 209-216..

[15] Karimi, M., Esfandiar, R., & Biria, D., Simultaneous delignification and saccharification of rice straw as a lignocellulosic biomass by immobilized Thrichoderma viride sp. to enhance enzymatic sugar production. Renewable Energy. 104 (2017) 88-95.

DOI: https://doi.org/10.1016/j.renene.2016.12.012

[16] Timerbaev N.F., Ziatdinova D.F., Safin R.G. and Sadrtdinov A.R., Gas purification system modeling in fatty acids removing from soapstock. Proceedings of 2017 International Conference on Industrial Engineering. Applications and Manufacturing. ICIEAM 2017. (2017) 8076418..

[17] Prathyusha, N., et al., Modelling of pretreatment and saccharification with different feedstocks and kinetic modeling of sorghum saccharification. Bioresource technology. 221 (2016) 550-559..

[18] Susilo, J., & Bennington, C. P. J., Modelling kappa number and pulp viscosity in industrial oxygen delignification systems. Chemical Engineering Research and Design. 85(6) (2007) 872-881.

DOI: https://doi.org/10.1205/cherd06167

[19] Popov, I.A., Shchelchkov, A.V., Gortyshov, Y.F. et al., High Temp. 55 (4) (2017) 524..

[20] Lashkov V.A. et al., IOP Conf. Ser.: Mater. Sci. Eng. 124 (2016) 012111..

[21] Salmi, T., Wärn, J., Mikkola, J. P., & Rönnholm, M., Modelling and simulation of porous, reactive particles in liquids: delignification of wood. Computer Aided Chemical Engineering. 20 (2005) 325-330.

DOI: https://doi.org/10.1016/s1570-7946(05)80176-2

[22] Vega, A., Bao, M., & Lamas, J., Application of factorial design to the modelling of organosolv delignification of Miscanthus sinensis (elephant grass) with phenol and dilute acid solutions. Bioresource technology. 61 (1) (1997) 1-7.

DOI: https://doi.org/10.1016/s0960-8524(96)00056-9

[23] Stepanov V.V. et al., Composite Material for Railroad Tie. Solid State Phenomena. 265 (2017) 587-591..

[24] Kumar, R., Hu, F., Hubbell, C. A., Ragauskas, A. J., & Wyman, C. E., Comparison of laboratory delignification methods, their selectivity, and impacts on physiochemical characteristics of cellulosic biomass. Bioresource technology. 130 (2013) 372-381.

DOI: https://doi.org/10.1016/j.biortech.2012.12.028

[25] Rocha, G. J. M., et al., Steam explosion pretreatment reproduction and alkaline delignification reactions performed on a pilot scale with sugarcane bagasse for bioethanol production. Industrial Crops and Products. 35 (1) (2012) 274-279.

DOI: https://doi.org/10.1016/j.indcrop.2011.07.010

[26] Marton, G., et al., Modelling of biomass fractionation by prehydrolysis-delignification. Chemical engineering science. 43 (8) (1988) 1807-1812.

DOI: https://doi.org/10.1016/b978-0-08-036969-3.50013-0

[27] Gusev V.G., Fomin A.A. and Sadrtdinov A.R., Dynamics of Stock Removal in Profile Milling Process by Shaped Tool. Procedia Engineering. 206 (2017) 279-285.

DOI: https://doi.org/10.1016/j.proeng.2017.10.474

[28] Hubbell, C. A., & Ragauskas, A. J., Effect of acid-chlorite delignification on cellulose degree of polymerization. Bioresource Technology. 101 (19) (2010) 7410-7415.

DOI: https://doi.org/10.1016/j.biortech.2010.04.029

[29] Timerbaev N.F., Sadrtdinov A.R. and Safin R.G., Software systems application for shafts strength analysis in mechanical engineering. Procedia Engineering. 206 (2017) 1376–1381..

[30] R.G. Safin et al., Technology of Wood Waste Processing to Obtain Construction Material. Solid State Phenomena. 265 (2017) 245-249..

[31] D. V. Antonenkov, D. B. Solovev, Mathematic simulation of mining company's power demand forecast (by example of Neryungri, coal strip mine). IOP Conf. Series: Earth and Environmental Science. 87 (2017) 032003. [Online]. Available: http://dx.doi.org/10.1088/1755-1315/87/3/032003.

DOI: https://doi.org/10.1088/1755-1315/87/3/032003