Heat Treatment of Materials

Volume 118

doi: 10.4028/www.scientific.net/SSP.118

Paper Title Page

Authors: Kwang Koo Jee, Jin Seong Park, Y.S. Lee, Woo Yang Jang

Abstract: The effects of flash-heating and aging on the microstructure and transformation characteristics has been studied in Cu-Al-Ni based...

59
Authors: Bong Keun Lee, Woo Young Song, Tae Kyo Han, Chang Ho Ye, Hyong Chol Whang, Chung Yun Kang

Abstract: In the case of transient liquid phase diffusion bonding with Ni base superalloy GTD-111, the bonding temperature was sustained at 1403K ~...

65
Authors: Jae Keun Hong, Ji Hong Park, Nho Kwang Park, Seong Jun Kim, Chung Yun Kang

Abstract: Effects of solution treatment on the microstructure and mechanical properties in wrought Alloy 718 were investigated. For the improvement...

71
Authors: Hyun Gil Kim, Yong Hwan Jeong

Abstract: Most of the advanced Zr-based alloys contain Nb for improving the corrosion resistance. However, the Nb effect on the corrosion behavior of...

77
Authors: Y. Sun, E. Haruman

Abstract: This paper gives a brief review on the three low temperature plasma surface alloying processes that have been developed in recent years to...

85
Authors: Liu Ho Chiu, Yu Jen Chen, Chang Hui Wu, Heng Chang

Abstract: The effects of vacuum carburizing under an acetylene atmosphere at 950 and 1000, followed by gas quenching and tempering at various...

91
Authors: Masahiro Okumiya, Satoshi Hagi, Kazuya Orita, Yoshiki Tsunekawa, Yoshito Umeda, Takayuki Nagai

Abstract: Acetylene and ethylene are frequently used in vacuum carburizing in Japan. In this study the natural gas which is available from the...

97
Authors: In Sup Lee

Abstract: Plasma nitrocarburizing and plasma oxidizing treatments were performed to improve the wear and corrosion resistance of S45C steel. Plasma...

103
Authors: Y.Z. Kim, T. Murakami, Takayuki Narushima, Yasutaka Iguchi, Chiaki Ouchi

Abstract: Surface hardening treatment of titanium materials in use of CO gas was studied including investigation of post heat treatment under vacuum....

109
Authors: Jung Hyun Kong, Jang Hyun Sung, Sang Gweon Kim, Sung Wan Kim

Abstract: Microstructural changes and hardness variations in SKD11 steel have been investigated during the processes of carbide dispersion (CD)...

115

Showing 11 to 20 of 108 Paper Titles