Search results

However, if CMS are used alone as the adsorbent, there is no explosion risk in the adsorption process due to the reduction in oxygen concentration.
However, a pressure increase results in an energy consumption increase, and a decrease in the AC/CMS ratio will result in a reduction of the methane concentration in desorption gas.
Vol. 30 (2010), p. 55 [7] National Bureau of Statistics, Carbon dioxide and methane emission amount, International statistical data, 2009

In recent times, microcellular injection molding have attracted great interest due to the considerable enhancement in stiffness, and substantial improvements in mechanical, thermal, and flammability properties while realizing part weight reduction by replacing plastics with the supercritical fluid (SCF).
Since the shrinkage and warpage at the far away gate position was slightly greater than at that gate position, the “ nominal-the-better ” method was used to compute the S/N ratio of the measured data and to obtain the S/N response.
This study also quantitatively showed that, especially for the glass fibers reinforced PP, a reduction in the shrinkage and warpage could be achieved with the microcellular injection mold process.

From a preliminary study (data not shown), the minimum inhibitory concentration (MIC) of 1,8-cineole that could control the growth of S.
Approximately, 3-4 log reduction in Salmonella numbers could be obtained by the end of the storage period.
, 2003, 4:1457-1465; [4] Hosteini, M.H., Razavi, S.H., & Mousavi, M.A., Antimicrobial, Physical and Mechanical Properties of Chitosan-based Films Incorporated with Thyme, Clove and Cinnamon Essential Oils [J], Journal of Food Processing and Preservation, 2009, 33:727 – 743; [5] Pranoto, Y., Rakshit, S.K. & Salokhe, V.M., Enhancing Antimicrobial Activity of Chitosan Films by Incorporating Garlic Oil, Potassium Sorbate and Nisin [J], LWT-Food Science and Technology, 2005, 38:859–865; [6] Sadlon A.E., & Lamson D.W., Immune-Modifying and Antimicrobial Effects of Eucalyptus Oil and Simple Inhalation Devices [J], Alternative Medicine Review, 2010, 15 (1):33-47; [7] Mayachiew, P., Devahastin, S., Mackey, B.M., & Niranjan, K., Effects of Drying Methods and Conditions on Antimicrobial Activity of Edible Chitosan Films Enriched with Galangal Extract [J], Food Research International, 2010, 43:125–132; [8] Guillard V., Issoupov V., Redl A., & Gontard N., Food Preservative Content Reduction

The samples were annealed for 12h at 673K, and then plastically deformed at room temperature, using an hydraulic press, to a thickness reduction of 25% with respect to the original dimension.
The data for the lifetime spectra were analyzed by using the PATFIT88 computer program [12].
The mean lifetime of positrons (τ) reflects the characteristics of defect formation as a function of the degree of thickness reduction.

A common finding is that addition of a simple electrolyte (salt) leads to a reduction in the viscosity of polymer in auqeous solution.
Also presented in this figure are the viscosity data changing from 750mPa·s to 0 mPa·s.
The effect of shield reduces the carboxylate repulsion of the polymer backbone, leading to a reduction in the molecular coil size which is reflected.

Therefore, limitation of PPCPs reduction in wastewater treatment plants could cause their contamination in the water environment, resulting in recently emerging concerns for the safety of drinking water, reclaimed wastewater, and aquatic environments.
Various photolysis systems have been used to evaluate abiotic degradation of drugs, such as UV/H2O2, TiO2/UV, and Fenton reactions [13-15]; significantly limited data exists on the fate of caffeine in the natural environment.
The ion of m/z 143 indicated mass reduction of 52 Da from caffeine of 194 Da and was likely to be the protonated form of dimethylparabanic acid 2 (Scheme 1), a known oxidation product of caffeine (1) [19].

This is due to a reduction in the viscosity of the oil and, as a result, friction losses.
Engine cooling system can contribute in some of the engine aspects like reduction in fuel consumption and minimizing exhaust and fuel emission.
This data are expected because of the resulting increase in the thermal resistance of the coolant side due to its poorer thermal properties.

ECU has fuctions of data collection, work condition decision,real-time scheduling, signal output controlling and so on.
References [1] DONGHong-y,i ZHOULong-bao, WANGYing, DENGXiang-bin, PANKe-yu，”reduction of NOx emission of CA498 engine fueled with dim ethyl ether by means of exhaust gas recirculation”, Internal Combustion Engine Engineering, 26(2),44-46,(2005).
Reduction of NOX Emissions from a Light Duty DI Diesel Engine in Medium Load Conditions with High EGR Rates[C].SAE paper 2008-01-0643 [3] WUJun2hua, HUANGZhen, QIAOXin2qi, ZHANGWu2gao,“experimental study of EGR on performance and emissions of a turbocharged DME engine”, Journal of Internal Combustion Engine, 26(2),147-152,(2008).

As the rank of a coal increases, the surface functionality decreases due to the progressive reduction in carboxyl, methoxyl, hydroxyl and carbonyl groups [1].
Nitrogen was used for surface area measurements rather than carbon dioxide since the resulting surface areas were to be directly compared to data pertaining to bulk surface properties rather than the micropore characteristics of the coals under investigation.
Results and discussion Contact angle.The contact angle measured through water on the three coals under investigation are given in Table 3.The presence of surfactant causes a decrease in the contact angles from that measured in the absence of surfactant for the Xiangshan ,Jincheng and Baode coals, showing that adsorption of the surfactant has, in these cases, increased the wettability of these coals.The largest change in contact angle was observed for the non-ionic surfactant (TX-10), with the higher rank Xiangshan coal affected most, having a reduction in contact angle of approximately 19.13°.

As a result, the reduction coefficient of the construction elements with three sides fired is higher than that of with four sides fired.
Zhimei Zhang [9] creates PYZCZL programme by combining the experimental data of Brunswick University of Technology, Germany[10].
In the study of simulating experiments at high temperature, the adopted heating-up curve is usually ISO834 standard heating-up curve, with other heating-up curve negeleted; as for cooling, natural temperature reduction is usually adopted.